manualshive.com logo in svg

2N Indoor Touch 2.0, User Manual

Share
Download
2N Indoor Touch 2.0 User Manual Download Page 66

2N TELEKOMUNIKACE a.s., www.2n.cz

66/135

3.3.3.6 Input and Output

This section helps you set the input/output parameters.

DOOR BUTTON

– enable/disable the function.

Door button 

  –  ON  by  default.  Define  the  pulse  rise/fall  time  detection 

Inverted  input  mode
and  application  response.  With  ON,  the  application  does  not  start  ringing  until 
the fall time is detected whenever the button is released. With OFF, the ringing 
starts when the rise time is detected the moment the button is pressed.

 – display the input to which the door button is connected.

Used input

 – set the lower ringing limit after the button is pressed.

Minimum ringing time

 – set the upper ringing limit after the button is pressed.

Maximum ringing time

 – select the default user ringing.

Door ringtone

 

  –  make  the  application  ring  via  DND  if  ON  is  set. 

Bypass  DND mode

Summary of Contents for Indoor Touch 2.0








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands