2N Access Unit QR, User Manual, Page: 113 / 128

4. Select the device to be configured and right-click it. Select Browse... to open the device administration
web interface login box for configuration.
TIP
• Double click the selected row in the 2N Network Scannerlist to access the device
web interface easily.
• To change the device IP address, select Config and enter the required static IP
address or activate DHCP.
The default login data are:
Username:
Admin
Password: 2n
It is necessary to change the password immediately upon the first login.
CAUTION
If the found device is grey highlighted, its IP address cannot be configured using this
application. In that case, click Refresh to find the device again and check whether
multicast is enabled in your network.
TIP
It is recommended that a password is used that is difficult to break. It is not recommended
that names, places or things, especially those closely related to the user, are used in the
password.
For increased password security, it is recommended that:
• the random password generator is used,
• the password length is 12 characters at least,
• various characters from different character sets are combined (small/capital letters, digits,
special characters, etc.).
Firmware Update
We recommend that the firmware is also updated during the 2N Access Unit QR installation. Refer
to 2N.com for the latest FW version. Refer to Maintenance for the firmware upgrade procedure.
TIP
You can make bulk updates for multiple devices via 2N Access Commander.
Device Restart
To restart the device choose one of the following options:
• using disconnection from the power supply,
• via the web configuration interface.
Brief Guidelines
113