manualshive.com logo in svg

2N 9160341, Installation Manual, Page: 105 / 107

Share
Download
2N 9160341 Installation Manual Download Page 105

2N Access Unit Installation Manual

105

 /  

107

5.3 Other Countries' Legislation

Thailand

5.4 General Instructions and Cautions

Please read this User Manual carefully before using the product. Follow all instructions and 
recommendations included herein.

Any use of the product that is in contradiction with the instructions provided herein may result 
in malfunction, damage or destruction of the product.

The manufacturer shall not be liable and responsible for any damage incurred as a result of a 
use of the product other than that included herein, namely undue application and disobedience 
of the recommendations and warnings in contradiction herewith.

Any use or connection of the product other than those included herein shall be considered 
undue and the manufacturer shall not be liable for any consequences arisen as a result of such 
misconduct.

Moreover, the manufacturer shall not be liable for any damage or destruction of the product 
incurred as a result of misplacement, incompetent installation and/or undue operation and use 
of the product in contradiction herewith.

Summary of Contents for 9160341












































































































Reviews:

No comments