2N 91378601, User Manual

Page: 87 / 110

2N® Indoor View User Manual
87 / 110
•
Set the Directory via the web interface in the Directory / Device section. You can add a device
manually, by clicking on the device adding icon or automatically by clicking the registered
device searching icon . Select the device in the list to add it automatically to the Directory
list. The values are completed in the basic settings. With manual addition of a device/user to the
Directory, the basic parameters are not completed automatically but have to be added
manually. Make sure to complete the proper parameter in the Display section to display the
CLIP. This helps the user choose and call any device displayed; refer to
3.2.2 Directory for more
details.
4.3 Settings
Press the button on the Home page to display the device settings. Use the Settings menu
for local device settings.
The menu contains 8 sections:
Display
Brightness – set the display backlight value.
• The camera switching function is only displayed if it has been activated and
properly configured in the intercom.