54
AT&Gxx=atcmd
Send command for AT commands directly into GSM module
AT&Gxx=at+cnum – SIM card telephone number
AT&Gxx=at+cpin=”xxxx” – PIN entering
AT&Gxx=at+clck=”sc”,1”xxxx” - PIN request enable
AT&Gxx=at+clck=”sc”,0”xxxx” - PIN request disable
Log file
AT&L
Log file listing (BLUESTAR awaits pressing of the Space bar after
every 20 lines)
AT&C
Call file listing (BLUESTAR awaits pressing of any key after every
20 lines)
AT&CR
Call file listing and deleting (BLUESTAR awaits pressing of the
key “#“ for delete this line /with info about call/ form memory and
send next line)
11.2. Configuration Commands
11.2.1. Status Information
AT&V
Overview of all system settings
AT&VI
Overview of PRI ISDN settings
AT&V0
Overview of basic GSM settings
AT&V#
Overview of #-th GSM group settings (#=1-8)
AT&VALL
Overview of all GSM group settings
AT&N#
Overview of parameters of network list no. # (#=1-8)
AT&NALL
Overview of parameters of all network lists
AT&R
Owerview of LCR lines
11.2.2. Default Reset
AT&FRES
Reset with gateway factory settings
11.2.3. System Settings
AT%S70=x.x.x.x
BLUESTAR IP address
AT%S71=x.x.x.x
IP address mask
AT%S81=
Initialization string for setting of mode connected
to the gateway COM2
AT%S90=x
Type of assignment of B-channels to GSM
modules (0-rotating; 1-locked; 2-according to
credit)
AT%S91=x
Way of call information recording (0- no record;
1- successfully connected outogoing call; 2-
successfully connected incomming calls; 3-
successfully connected incoming and outgoing
calls; 5- all outgoing calls; 6- all incomming calls;
7-all ioutgoing calls)
AT%S93=x
Global selection of SIM card (0= according to
GSM group, 1-4= number of SIM holder)
AT%S98=xxxx
PIN code for SIM cards inserted in the gateway
AT%S99=
dd.mm.yy.w/hh:mm:ss
Gateway date and time settings
AT%X00=hout,hin,min
Automatic logout of GSM modules
