4
www.2MTechnology.net
3.2
Installation
You may choose ground installation or base plate installation. The steps are as
follows.
NOTE!
For long-term use at a fixed location, ground installation should be adopted.
3.2.1
Ground Installation
1.
Mark the positions of holes on the ground by referring to the following figure.
Fixing hole
Cabling hole
2.
Use the electric drill to drill holes according to the marked positions.
3.
Turn the extension pole clockwise to connect it to the pole base.
Summary of Contents for 2MITD-2
Page 4: ...2 www 2MTechnology net...
Page 23: ......
