Copyright © 2021 Nortek Security & Control LLC
13
System Status Messages
At the top-left of the screen, different messages appear to reveal the current system state .
System Status Messages
This table describes the different system status messages on the system .
This system status message . . .
Indicates that . . .
System
Ready
To Arm
Indicates all sensors are closed and the system is ready to be armed .
System
Not Ready
to Arm
One or more sensors are open .
System
Ready
To Arm (BYPASS)
The system is ready to arm and one or more sensors are on the Bypassed Sensors list .
See
, pg . 23 .
System Arming (STAY)
The system is in the process of arming itself in Stay Mode .
System Arming (AWAY)
The system is in the process of arming itself in Away Mode .
System Armed (Stay)
System Armed (Away)
The system is armed and protecting the premises in STAY or AWAY mode .
Restarting Security Process
The security system is restarting. Typically, this only appears after an installer modifies a
System Configuration setting.
System Icons
The status bar that appears on the top of the Home screen and on most system menus reveals a variety of icons
providing system information and access to different functions .
System Status Bar
System Icons
Status Icons
Action Icons
Battery Power Status
Notifications
Battery Charging
Turn Display Sleep Mode On
On-Board Camera is active
Audible Beeps On
Power
Audible Beeps Off
Power Disconnected
Update is available
