56
2GIG EDGE User Guide
Date & Time
Set the panel’s Date and Time .
1 .
At the System Settings screen, tap the
Date &
Time
(
) icon .
2 .
Use your finger to scroll and set Time and Date
settings .
3 .
Tap
when finished.
NOTE:
Date & Time is automatically updated
during panel registration .
Date & Time Settings
System Tests
To ensure continued protection and proper system
operations, it is important to perform a sensor and
console test on a weekly basis .
NOTE:
To use this feature, you must know the
Master User Code .
At the System Settings screen, tap
System Tests
(
) .
There are six tests available .
System Tests
Sensors Test
Tests signals between the installed sensors and the
Control Panel .
1 .
Tap
Sensor Tests
(
) . This places the 2GIG
EDGE Panel into Walk Test Mode and transmits a
Walk Test Started
report to the Central Station .
2 .
At the
Sensors Test
screen, review the list of
sensors installed with your system .
When tests are successful, a
GREEN
check mark
appears to the left of the test name . This indicates the
sensor is operating and the wireless signal strength was
good .
WARNING!!
If a
RED
appears, it indicates the
test failed . If the sensor continues to fail, contact
your dealer for technical assistance .
3 .
Tap the
button to return to the System Test
Menu .
Sensor Tests
