2connect 2C-WHS-26-2D, User Manual

Page: 10 / 63

- 10 -
Indicator status explain
red light on Charging
red light off No charging
green light on No decoding
green light off Decode successfully
one blue light on Pairing successful or connect to USB
two blue light twinkle alternately Bluetooth HID pair mode
1.5 Start-up, shutdown, standby and restart
Start-up
：
Connect host computer with scanner, which will automatically start-up and in working
state.
Shutdown
：
Remove the data cable which is connected with scanner; remove the USB which is
connected with host computer;
Restart
：
If the product crash or no response when pressing button, please restart it.
1.6 Maintenance
* The window must be kept clean, the supplier do not bear the guarantee responsibility due to the
improper maintenance.
* Avoid the window being wear and tear or scratched by hard object
* Use the hairbrush to remove the stain on the window
* Clean the window with a soft cloth, such as lens cleaning cloth
* Spraying liquid onto the window is prohibited.
* Prohibit any cleaning solvents, except for the cleaning water.
1.7 Reading skills
If the barcode is small, it should be closer to the scanning window; if the barcode is large, it
should be far away from the scanning window a little more, thus easier to be read correctly.
If the barcode is highly reflective (for example, the coated surface), you may need to tilt the
barcode at an angle to successfully scan it.
Barcode scanning example
：