TM
Bluetooth Speaker
Model: BT268
User Manual
Power:
Please charge your Bluetooth speaker fully before its first use.
To charge the battery:
Using a Micro USB Charging Cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a powered
USB source such as a computer, laptop or USB AC adapter.
When your Bluetooth speaker is charging, the indicator light will turn red.
Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back of the speaker to
‘ON’ position. The light will be on at the same time
Make sure the Bluetooth function on your device is turned on.
Search the speaker named,”
2BOOM-BT268
”.
Once you have selected the pair name, your device will pair with the device.
Once your speaker is paired, a tone will be heard.
Start playing music on your device. Make sure that you keep your device within a 33 feet range
of your Bluetooth speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Specification:
Speaker output: 3W*1
Drive unit: 52mm
Battery Capacity: 350mAh
Frequency Response:160Hz-18KHz
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not overcharge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
