Manual
page 4 of 10
Handbuch VC Winch Kit EN 1_0.docx
FN:
552603b (LG f. ZRS Graz)
Bank:
RB Graz-Mariatrost
1st-Relief GmbH
VAT No.:
ATU76757859
Swift/BIC:
RZSTAT2G223
Schulgasse 5
IBAN:
AT08 3837 7000 0420 9185
8010 Graz, Austria
2
Specifications
The custom winch kit is designed specifically for use with VersaChock brand Tilting Davits. Assists
loading dinghies onto tilting davits with the included hand operated winch. It is removable and
easily installs with no tools by simply inserting the included square tube through the winch arms
and into the tilting davit arms. Winch can be mounted on top or on backside of main support arms
with included hardware.
2.1
Construction
-
High Density Polyethylen (HDPE) main support arms
-
Ratcheting hand winch with 610 cm (240 inch) x 4,76 cm (1 - 7 / 8 inch) strap
-
Square aluminium tube 122 cm (48 inch) x 5,08 cm (2 inch)
-
stainless steel hitch pins for retaining tube
-
Maximum pulling capacity 160 kg (350 lbs)
-
Designed for use with VersaChock brand tilting davits
3
Installation / Important Notes
Please note the following important notes:
-
We strongly recommend that the product specification, use and installation be checked by a
professional technician before purchase and that the installation is carried out by the same
person.
-
This manual is for advice only. THERE ARE TOO MANY HULL VARIATIONS IN ORDER
TO SPECIFY AN EXACT INSTALLATION OR AN INSTALLATION LOCATION FOR
EVERYONE.
-
Not intended for use in extreme conditions (i.e.: high forces from water, wind, etc.)
-
Before each use, make sure that the hitch pins of the support tube are securely inserted.
-
Check the integrity of the hull, including hull thickness, chine and stringer locations, making
sure proper support will be provided.
-
Rinse with freshwater after each use, as saltwater and other contaminants can cause
staining, even though we use the most corrosion resistant materials.
-
Under no circumstances should person/s or animal be allowed in watercraft whether
loading, or in stored position.
-
Do not add additional gear, etc. that may subject the watercraft to be over the maximum
weight capacity.
-
Always pull drain plug when stored to prevent excess water to accumulate, which could
cause excess weight.
-
Be sure the attachment bolts are secure before each use.
-
FAILURE TO FOLLOW THE ABOVE MAY RESULT IN DAMAGE, LOSS OR SERIOUS
INJURY!
