P. 55 of 89
nanobox | razzmatazz User Manual
Oct 14, 2022
WAV File Menu
Remove a WAV from a Pad
If you decide you no longer want to use a WAV with a
pad, you can unload the WAV file.
1.
Touch the WAV graph on the Pad Dashboard to
open the WAV Screen.
2.
Touch the WAV graph area at the top of the
screen, or push the Right Arrow button while
the WAV file parameter is selected, to open the
WAV Management screen.
3.
On the WAV Management Screen, touch File
and then Unload.
The mapping to the WAV file is removed from the pad.
PAD PITCH CONTROLS
There are a few different places to adjust the pitch of a pad. The FM Oscillators each
have a Fixed Pitch and Detune parameter. The Fixed Pitch parameter allows you to
tune the oscillator to a standard note on the scale. You can then nudge the pitch
away from the base note using the Detune parameter.
The WAV sound source gets its base pitch from the WAV file itself. You can then
adjust the pitch in full semitones using the Pitch Semi parameter. You can further
refine the pitch using the Detune parameter.
On the Macro controls screen, there is a Pitch knob. This knob is designed to allow
for fine-tuning the pitch of the final sound resulting from all three sound sources.
Note that the Noise Oscillator cannot be pitched. Any changes to pitch settings will
not impact an FM Oscillator that uses the Noise waveform.
