1010music Blackbox User Manual Download | Manualshive

Page: 27 / 106

background image

9.

To the right of the exclusive grouping option is the Playback quality option, set to

Normal in the screenshot. For most WAV files, the normal mode provides high

quality playback with a moderate draw on the processor. If you hear aliasing

during playback of your WAV file, touch this button and select HighQ mode.

HighQ mode has a higher draw on the processor, so it is recommended that you

use Normal mode unless you are having issues.

Several of the pad parameters have three black boxes below them. These pads are
potential modulation targets, and these boxes are used to control the modulation
parameters. We will discuss modulation later in the

Work with MIDI Inputs

section.

There are additional configuration options for a pad that vary based on which Pad Mode
is selected. We will walk through the configuration of each of the Pad Modes next.

Set Up a Sample Pad

Use a sample pad when you only want to play or loop through a WAV file with no slicing
and no beat synchronization within the playback. This can be useful for playing one-shots
like drum sounds, or playing melodies using samples for the notes. You can also use this
mode when you have a bank of samples that you want to map across the keyboard. This
can be used to map different sounds to different note triggers, or to map the same
instrument recorded at different pitches across the notes on the keyboard to get
improved pitch shifting across a broader range of notes. We will first discuss Sample
mode pads loaded with a single sample, and then explain the special case of multi-
samples.

8.

At the top of the ADSR parameters page, the menu option

to the right of the grid icon allows you to control exclusive

grouping of pads. Touch this menu option, Excl C in the

screenshot, to see the options. Touch an option to select it.

When Excl X is selected, there will not be an exclusive

behavior for this pad. When a pad is assigned to Exclusive

Group A, B, C or D, any other pad in this group will stop

whenever a pad in the group is triggered.

Pad Exclusive

Groupings

Page 27 of 106

Copyright 1010music LLC 2021

Blackbox User Manual 1.7

«
...
25
26
27
28
29
...
»

Summary of Contents for Blackbox











































































































Reviews:

No comments

Related manuals for Blackbox

Brand: Makita Pages: 7

Brand: Makita Pages: 9

Brand: Makita Pages: 7

Brand: Pacer Pages: 20

Brand: FONESTAR Pages: 12

Brand: Numark Pages: 16

Brand: Wassermann Dental-Maschinen Pages: 16

Brand: Sammic Pages: 8

Brand: MFB Pages: 2

Brand: Amptweaker Pages: 4

Brand: T&M Pages: 17

Brand: Feelworld Pages: 35

Slow Motion SM200

Brand: Behringer Pages: 2

Brand: Collomix Pages: 110

Brand: Tascam Pages: 56

Brand: TC Electronic Pages: 2

Brand: Blackstar Pages: 16

Brand: Zoom Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands