BLACKBOX USER MANUAL v 1.5
5/6/2020 8:54:00 PM
Copyright 1010music LLC 2020
Page 35 of 70
Blackbox 1.5 changes where new recordings are stored. When you create a new recording, it will be stored in the
folder for that preset. For example, the first new recording for the
My Kickin Grooves
preset will be saved as
\Presets\My Kickin Grooves\RC000001.wav
. When you load an existing WAV file into a pad, the preset will have a
pointer to that WAV file in its source folder. If you want to gather copies of all of the files for a preset into the preset
folder, use the preset pack option.
Note:
•
If you delete, move or rename a WAV file, it will no longer be available for use by presets that were
previously using it. The name of the WAV file will still appear in the Preset, but the Waveform screen will
be blank until you load a new WAV file into the pad.
•
Blackbox supports samples in the WAV file format. It supports 1 or 2 channel files with 16, 24 or 32 bit
resolution at any sample rate. 48kHz is the preferred sample rate.
•
WAV file names may use Alpha Numeric Characters (A-Z, 0-9) and some special characters. The
following characters are NOT allowed: double quotes, forward slash, back slash, question mark,
asterisk, less than and greater than symbols, the colon and the pipe symbol (“ /
\ ? * < > : |). File
names must be less than 256 characters, including the path name. Files that do not conform to these
naming constraints will not be recognized by blackbox.
To Delete, Save As or Rename a WAV File:
When you use blackbox to delete a WAV file, that file is removed from the microSD card. This file will no longer be
available for use by presets. This means that any presets that previously used this WAV file will no longer include this
WAV file. To delete a WAV file:
1.
Touch a loaded pad on the Pads screen to display the Waveform Screen.
2.
Touch the name of the WAV file at the top of the screen to display the
WAV Edit screen.
3.
Use the control knobs to scroll to the WAV file you want to delete. You
may need to load directories to navigate to the file you want to delete.
4.
Touch
File
to display the WAV File Actions menu.
5.
Touch
Delete
to delete the selected WAV file from the microSD card.
Touch Save As to save a copy of the WAV file with a different name.
Touch
Rename
to change the name of the file on the microSD card.
6.
If you select
Delete
, blackbox will display a confirmation prompt. Touch OK to confirm, or touch anywhere
else to cancel.
7.
If you select
Rename
or
Save As
, blackbox displays the File naming keyboard. Use the touchscreen to enter
letters using the keyboard. Touch the to delete the previous letter. Turn a knob to reposition the cursor.
Touch Enter to save your changes.
8.
You can
Load
a different WAV file from here as well.
9.
Touch the back arrow
<-
to exit the screen.
Note:
•
If you delete, move or rename a WAV file, it will no longer be available for use by presets that were
previously using it. The name of the original WAV file will still appear in the Preset, but the Waveform
screen will be blank until you load a new WAV file into the pad.
•
To remove a WAV file from a pad without deleting the file, go to the Waveform screen and touch the
Pad Mode icon to the left of the file name, and then touch
New Recording
. You can press
PADS
to go
back to the Pads screen without loading a file and the pad will be empty.
WAV File Actions Menu
Summary of Contents for BLACKBOX 1.5
Page 1: ...BLACKBOX 1 5 USER MANUAL ...
