manualshive.com logo in svg

1010music Bitbox mk2 1.0.8, User Manual

Get the most out of your 1010music Bitbox mk2 1.0.8 with our comprehensive User Manual. Download it for free from our website [website] and unlock the full potential of this powerful sampler and drum machine. This manual provides step-by-step instructions and useful tips to enhance your music production experience.

Share
Download
background image

Note:

► If you use an existing file name when you use

Save As

, the old file will be

overwritten with the current WAV file and parameters.

These parameters are saved in a format that is commonly used by other music
products. This means you can set these values in the other product and then use them
in bitbox mk2, and the reverse.

When bitbox mk2 first loads a WAV file that has parameters stored in it, it will load the
values of the parameters that are in the WAV and use default values for the other
parameters. If you change a value of one of these parameters for the pad, those
changes only apply to this pad and are not automatically saved back to the WAV file.
This allows you to override parameters for specific pads. Bitbox mk2 also makes an
assumption about the pad mode based on the parameters that are available in the WAV
file. If there are slices in the WAV, then it sets the pad mode to slicer. If there are loop
points in the WAV, then it sets the pad mode to sample.

To save the values you have configured for a pad back to the WAV file:

1.

Open the WAV screen for the pad.

2.

Touch the name of the WAV file at the top of the screen to display the WAV
selection screen.

3.

Touch File and then Save or Save As. If you selected Save, bitbox mk2 will
save the configured parameters into the same WAV file you have loaded. If
you chose Save As, you will see the WAV file naming screen. Type in a new
name to save the changes to a different WAV file, and then touch Enter to
save. Bitbox mk2 will now load the newly modified WAV file into the pad.

To revert back to the parameter and slice values stored in the WAV file, simply reload
the file into the pad.

Copyright 1010music LLC 2020

Page 38 of 82

Bitbox MK2 1.0.8 User Manual

Summary of Contents for Bitbox mk2 1.0.8



















































































Reviews:

No comments

Related manuals for Bitbox mk2 1.0.8

Brands by name

Popular brands

Load more brands