P. 37
nanobox | tangerine User Manual
Dec 11, 2023
ADJUST FX SEND LEVELS
On the FX Sends screen, you choose how much of the audio signal for each pad is sent to
FX1 - Delay, and FX2 - Reverb. Select a pad from the grid and turn the knobs to adjust the
sends for FX1, shown on the top graph, and FX2, shown on the bottom graph.
The delay can fatten the sound of the WAV or add extra bounciness to it. Add in the delay
filter and you can add a different sound to the delayed signal. You can modulate three of
the delay parameters to add more variety to the sound.
nanobox
Right Arrow
Access the FX1
Parameters.
Pads
Touch a pad
to select it.
FX2
Turn to adjust how
much of the audio
signal for the
selected pad is sent
to FX2.
FX1
Turn to adjust how
much of the audio
signal for the
selected pad is sent
to FX1.
FX Send
Graphs
Top bar is
FX1, bottom
bar is FX2.
Layer button
Cycle between Pads
Home, Mixer and FX
Sends.
Effects are not
applied to the
monitoring
signal when
recording.
