background image

Digital Cinema Projector
Ceiling Bracket

PMT-L11 

(for Low Ceilings)

PMT-H15 

(for High Ceilings)

Installation Manual

Be sure to read this manual thoroughly
before using this bracket. After you have
read this manual, retain it for future
reference.

When installing the projector using this

bracket, all installation work must be

performed by a qualified contractor or

dealer personnel.  The customer must

never attempt to perform this installation

work.

Packing List .................................................................................................................................. 4

Names of Parts ............................................................................................................................. 5

Dimensions of Parts .................................................................................................................... 7

Guidelines for the Projector Installation Position and Screen Size ........................................ 8

Installation Examples ................................................................................................................ 10

Installing the Projector .............................................................................................................. 11

Adjusting the Projection Angle ................................................................................................. 14

Specifications ............................................................................................................................. 16

Contents

(PMT-L11)

(PMT-H15)

English

Français

Deutsc

h

Svenska

Italiano

Español

Nederlands

 11PMT_TOC_E

5/29/1, 9:16 AM

1

Summary of Contents for H15

















Reviews: