background image

CL Editor Owner’s Manual

1

Special Notices

• The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this 

manual in whole or in part by any means is expressly 
forbidden without the written consent of the manu-
facturer.

• Copying of the commercially available music 

sequence data and/or digital audio files is strictly 
prohibited except for your personal use.

• Yamaha makes no representations or warranties 

with regard to the use of the software and documen-
tation and cannot be held responsible for the results 
of the use of this manual and the software.

• The screen displays as illustrated in this owner’s 

manual are for instructional purposes, and may 
appear somewhat different from the screens which 
appear on your computer.

• For information on modification of system software, 

certain functions, or specifications due to version 
update of the application, please visit the following 
website:

http://www.yamahaproaudio.com/

• Windows is a registered trademark of Microsoft

®

 

Corporation in the U.S. and other countries.

• Apple, Mac and Macintosh are trademarks of Apple 

Inc., registered in the U.S. and other countries.

• The company names and product names in this 

Owner’s Manual are the trademarks or registered 
trademarks of their respective companies.

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Contents

Getting Started ......................................... 2
Master window ......................................... 9
Overview window ................................... 12
Selected Channel window....................... 25
Library window ....................................... 45
Premium Rack Library window ............... 48
Patch Editor window ............................... 49
Virtual Rack window................................ 53
Meter window ......................................... 67
Group/Link window ................................ 69
Scene window ......................................... 73
Custom Fader Bank Setup window......... 80
Custom Fader Bank window ................... 81
User Defined Keys Setup window........... 82
User Defined Knobs Setup window ........ 83
Sends On Fader window ......................... 85
Outport Setup window ........................... 86
Keyboard Shortcuts................................. 88
Index........................................................ 89

* Specifications and descriptions in this owner’s manual are 

for information purposes only. Yamaha Corp. reserves the 
right to change or modify products or specifications at any 
time without prior notice. 

CL Editor

CL Editor

CL Editor

Owner’s Manual

Owner’s Manual

Owner’s Manual

Description of menus and buttons

In the event that menu and button names on a Windows 
system are different from those on a Mac, this manual uses 
the Windows menu and button names followed by the Mac 
menu and button names in parentheses.

Summary of Contents for CL1


























































































Reviews: