background image

Aspirator Robot Xiaomi «MiJia»

Aspiratorul Robot «MiJia» este un dispo

zitiv deosebit de inteligent, care isi planifica rutele de curatare, fiind echipat cu senzori laser si cu ultrasunete de inalta fidelitate si dispozitive de 

masurare a distantei, ce pot alcatui instantaneu planul incaperii. Astfel, aspiratorul robot isi va planifica cele mai bune rute pentru un curatat complet si eficient. 

Dupa terminarea ciclului de curatare, robotul se va intoarce singur la statia de incarcare. 

Aspirator Robot

Statie de incarcare

Perie 

Cablu de alimentare

Curatare / Pornit/Oprit

O apasare scurta incepe ciclul de curatare.

O apasare lunga - Porneste sau Opreste robotul.

Lumina indicatoare;

Alb: nivel baterie peste 50%;

Galben: nivel baterie 50% - 20%;

Rosu: nivel baterie sub 20%;

Clipire regulata: robotul se incarca sau este in functiune;

Culoare Rosie si clipire rapida: stare de alarma.

Intoarcere la statia de incarcare/curatare partiala.

O apasare scurta - robotul se retrage in statia de incarcare. 

O apasare lunga activea

za modul de curatare partiala.

Capac acces filtru si indicator Wi-Fi

Atentie! Daca in timpul curatarii, incarcarii sau a curatarii

partiale, toate actiunile robotului se opresc temporar. 

Xiaomi, poate fi controlat si prin internet, cu ajutorul aplicatiei dedicate. Tot prin aplicatie, puteti verifica traseele de curatenie, starea bateriei sau a consumabilelor.

Aspiratorul Robot 

www.future-card.ro

www.future-card.ro

Summary of Contents for MiJia














Reviews: