background image

Summary of Contents for MK1157XJ

Page 1: ...CLUDING MODELS 27 Y RBS275PD Y GBS277PD Y KEBI171D Y KEBS177D 30 Y RBS305PD Y GBS307PD Y KEBI101D Y KEBS107D PARTS LIST Trim Kit 1 Screws 4 Req d 2 Extra Upper Duct 1 Rear Duct 1 BottomDuct 1 CUTOUT DIMENSIONS Height Width Depth min 27 30 17 1 4 25 I_ 281 2 21 lr2 with flush mount receptacle 23 3 4 if non flush receptacleis used I I I I 1 2 Screws 16 Req d 2 Extra Anti Tip Bracket 1 Bottom Bracket...

Page 2: ...tom duct with one 1 2 screw See figure Detail A 5 Remove the one existing screw from the right side of the microwave oven 1 2 screws 1 1 2 screws 4 1 6 Install bottom duct assembly with six screws as shown Fasten bottom duct to the right side of cabinet with one existing screw FRONT VIEW OF MICROWAVE i 1 2 screws 2 _ Existing screw t STEP 2 1 Remove the two existing screws from the back side of th...

Page 3: ... 2 Anti Tip erackm STEP4 1 Slide microwave oven part way into cabinet ope0ing _ Bottom bracket must be fiat to the cutout floor to engage correctly with anti tip bracket as shown 2 Plug in the microwave oven 3 Center the microwave oven within the cut out opening and slide the microwave oven in place engaging the anti tip bracket Ensure the microwave oven is accurately centered 4 Drill 3 pilot hole...

Page 4: ...Mark four hole centers through the four mounting holes of the trim kit NOTE Center the trim kit frame equally on all four sides 3 Remove the trim kit and drill four pilot holes use 7 64 drill or 35 drill 4 Attach the trim kit frame by using four 1 screws Make sure that the orientation is correct as stated above TrimKit Rgure Detail B STEP6 1 Your trim kit is now fully installed Replace any loose i...

Reviews: