background image

7106508579  RE

V3.0.0  

JetStream Gigabit Smart PoE+ Switch

Ethernet Ports (1–8)

1. To access the GUI of the switch, open a browser and type the default 

management address http://192.168.0.1 in the address field of the 

browser, then press the Enter key.

2. Enter 

admin

 for both the username 

and password in the lower case 

letters. Then click the Log In button 

or press the Enter key. (The first time 

you log in, change the password to 

better protect your network and 

devices.)

3. After a successful login, the main 

page will appear. You can click the 

menus on the top side and left side 

to configure the corresponding 

functions.        

Note:

For more details about how to configure the switch, see the Configuration 

Guide on the resource CD.   

PC

Note:

To log in to the switch, the IP address 

of your PC should be set in the same 

subnet as that of the switch. The IP 

address is 192.168.0.x (”x” is any 

number from 2 to 254). Subnet Mask 

is 255.255.255.0. For details, please 

refer to Appendix B in the User Guide 

on the resource CD.   

SFP Slots

IP Camera

AP

IP Phone

PoE Devices

Note:

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Maximum PoE power is 30 W for each PoE port and 58 W for all PoE ports.

DC Power Adapter

AC Power Cord

LED Explanation

Installation Guide

Configuration 

Connection

On:

 

Power on

Off:

 Power off

Power

Power

SPF1/SFP2 

On (Green):

 

Connected to a 1000 Mbps 

device

On (Yellow):

 

Connected to a 100 Mbps 

device

Flashing:

 Transmitting/receiving data

SPF1 SPF2

Flashing:

 System running normally

On/Off:

 System running abnormally 

System

System

On:

 51 W≤Total power supply<58 W

Flashing:

 Total power supply keeps≥

51 W more than 2 minutes

Off:

 

Total power supply<51 W

PoE MAX

PoE MAX

PoE Status (port 1–8)

On:

 Providing PoE power

Flashing: 

Current-overload/Short-circuit/

Connected to a Non-standard PD/Power 

exceeded the user-defined value

Off:

 Not providing PoE Power

PoE Status

Link/Act (port 1–8)

On (Green):

 Running at 1000 Mbps 

On (Yellow):

 Running at 10/100 Mbps

Flashing:

 Transmitting/receiving data

Link/Act

Internet

1

2

3

Reviews: