EO2-38062
1/8
TOSHIBA Wireless LAN Kit
B-EP700-WLAN-QM-R Installation Manual
Thank you for purchasing TOSHIBA wireless LAN kit, B-EP700-WLAN-QM-R.
The B-EP700-WLAN-QM-R is an optional wireless LAN interface module for the B-EP2DL/EP4DL Series.
The pictures used in this document are those of the B-EP4DL, but the installation procedure is common with the
B-EP2DL unless otherwise noted.
1. PACKING LIST
The following parts are supplied with the kit. Make sure you have all items shown below.
Wireless LAN Module (1 pc.)
Installation Manual
(1 copy)
Standard Label (1pc.)
FPC Cable
Note:
MAC address is printed on the wireless LAN module, as the following picture shows. Each wireless LAN
module has a unique MAC address. Although the MAC address can be checked by performing a parameter
print in the system mode, write down and keep it just in case that a parameter print cannot be performed or in
case of repair.
1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or electrocution.
•
Manual instructions must be followed when installing option kits or adding cables to avoid system
failures and to insure proper performance and operation.
•
Failure to follow manual instructions or any unauthorized modifications, substitution or change to this
product will void the limited product warranty.
2. Turn the power off and remove the battery before installing the wireless LAN module.
3. Be careful not to pinch your fingers or hands with the covers.
WARNING!
MAC
Address
For B-EP4DL Series (1 pc.)
For B-EP2DL Series (1pc.)
Connected to
Wireless LAN module
Connected to
Main PCB
Power
Cable
Ground
Wire
Connected to
Main PCB
Connected to
Wireless LAN module
Shield
Sheet
Ferrite Core
Ferrite Core
