background image

A26381-K276-Z100-3-5E19

English - 1

Introduction

The KBPC M multimedia keyboard offers you ease-of-use and functionality in a modern design:

• 

Audio playback via integrated stereo loudspeakers (2 x 1 W) or headphones

• 

Audio recording via integrated or external microphone

• 

PC supported, convenient telephony via telephone handset, headset (headphones with
microphone) or hands-free facility

• 

simple switching between telephone handset/headset and hands-free facility with the hands-
free button

• 

direct connection of mouse, telephone handset/headset, stereo headphones and external
microphone to the keyboard (avoiding a mass of cables)

System requirements

Your PC must fulfill the following requirements if you want to use all the functions of the KBPC M
multimedia keyboard:

• 

Audio board (sound card)
The audio board should have a stereo loudspeaker output or audio line output and a
microphone input.

• 

Modem board
Your PC should have a modem with voice function. If possible, the voice signal output of the
modem should be routed via the audio board. (In a lot of multimedia PCs this connection is
already implemented internally.)

• 

Communications software
No special demands are made on your communications software, just that it should be suited
to your requirements. It should be matched to your needs.

• 

Quickstart function
Your PC should have a Quickstart function (e. g. 

BIOSFaX

) in order to ensure reliable reception

for your answering machine, fax or telephone, and also to save power.

• 

Keyboard interface
Die Tastaturschnittstelle der Systemeinheit (5 V Versorgungsspannung) muß für mindestens
600 mA ausgelegt sein. This applies to all Siemens PCs (except notebooks).

Further information on these features is provided in the manuals for your PC and/or for the specified
system components.

Summary of Contents for KBPC M













Reviews: