SPC729 Bluetooth Alarm Clock Radio with USB Port
Instruction Manual & Warranty
Thank you for your purchase of this quality clock. The utmost care has gone into the design and
manufacture of your clock. Please read these instructions and store them in a safe place for future
reference.
1. PM indicator
2. Alarm 1 indicator
3. Bluetooth indicator
4. Alarm 2 indicator
5. FM indicator
6.
/FM/OFF
button
7.
ALARM 1
button
8.
TUNING
<
button
CONNECTING TO THE POWER SUPPLY
Begin by plugging in the AC adapter into a standard household outlet and the other end of the cord into
the
DC 5V
jack at the back of the unit.
INSTALLING THE CLOCK & ALARM BACK UP BATTERIES
The clock time and alarm (if set) can be maintained during a power failure by 2 x AAA/ LR03 batteries (not
supplied). Once the power is restored, check the time to make sure it is accurate and re-set if necessary.
INSERTING THE BATTERIES
1.
Open
the
battery
compartment
at
the
back
of
the
unit
by
pressing
on
the
catch
and
removing
the
cover
.
2.
Insert
2
x
AAA
/
LR
0
3
batteries
(
preferably
alkaline
batteries
)
into
the
battery
compartment
,
following
the
polarity
as
shown
on
the
diagram
inside
the
compartment
.
3.
Replace
the
battery
compartment
cover
.
USB CHARGING
To charge, connect your USB device to the USB port of this clock.
Note:
1. Use only with devices that require 5V USB power.
2. Each USB port provides 2,000mA recharging current. Devices requiring more than 2,000mA should not
be used.
3. Charging time may vary for different devices.
SETTING THE CLOCK
1. While the radio is off, press and hold the
TIME SET
button to activate time setting.
2. While holding down the
TIME SET
button, press the
HOUR
button to advance to the correct hour. The
PM indicator will light when the hour is advanced into the PM time.
4. Release the
TIME SET
button when the correct time is shown on the display
SETTING THE ALARM
1. To set the alarm time, follow steps (1) to (4) above, using
ALARM1/2
button, instead of the
TIME SET
button
USING THE ALARM FUNCTION
1. Press the
ALARM 1/2
button to select wake to beep or radio, and the selected alarm mode will light
up.
2. The beep or radio will come on at the set time.
3. To stop the alarm, press
/FM/OFF
or
ALARM 1/2
button and the alarm will sound again the next day.
4. To turn the alarm off completely, press the
ALARM 1/2
button until the alarm indicator has
disappeared from front display.
Note
: While the beep alarm volume is fixed and cannot be adjusted, the radio alarm volume can be
adjusted to your desired level using the
VOLUME
buttons. To select a radio station to wake up to, see
the section on “
LISTENING TO THE RADIO
”.
SNOOZE FUNCTION
Pressing the
SNOOZE
button after the alarm sounds will cause the alarm to pause and the alarm will
sound again in 9
minutes. This will happen each time the
SNOOZE
button is pressed.
SLEEP FUNCTION
With this function, you can listen to the radio for up to 60 minutes, after which it will turn off automatically.
1. When the radio is turned on, press the
SLEEP
button repeatedly to select the duration: 60, 45, 30, 15,
05 minutes or OFF.
2. At the end of the set time, the radio turns off automatically.
3. To cancel the sleep function before the end of the set time, press the
/FM/OFF
button to turn off
the radio immediately.
LISTENING TO THE RADIO
1. Press the
/FM/OFF
button to select the FM mode.
2. Press and hold the
<TUNING>
buttons to start automatic tuning up/down. Release the button when
the unit is receiving a station you would like to listen to. For manual fine-tuning, you can press it
briefly to adjust the frequency step by step.
3. Press the
/-
buttons to adjust the volume level.
4. Press the
/FM/OFF
button to turn off the radio.
For optimum reception
In FM mode, extend and position the FM antenna to achieve optimum reception.
PRESET RADIO STATIONS
You can store up to 10 stations.
1. Use the
<TUNING>
buttons to search for a station. Press and hold the
PRESET
button to store the
station and a number to be assigned for the preset will flash.
Optional:
Use the
<TUNING>
buttons to change the preset number to an alternative preset number.
2. Press the
PRESET
button again to confirm the preset.
3. Repeat steps (1) to (2) above to store other stations.
Listening to a preset station
While listening to the radio, press the
PRESET
button to select a preset station.
/FM/OFF
When pairing, remain within 3 feet of the unit.
3. While holding down the
TIME SET
button, press the
MIN
button to advance to the correct minute.
USING BLUETOOTH FUNCTION
1. Press
the
button
to
enter
Bluetooth mode and the Bluetooth
indicator
will flash
.
2.
Using
the
native
controls
on
your
Bluetooth
device
,
select
the
“
SPC729
”
in
your
Bluetooth
settings
to
pair
.
3.
When
successfully
paired
and
connected
,
the
Bluetooth
indicator
will
light up.
4.
Use
the
native
controls
on
the
connected
Bluetooth
device
to
select
a
track
.
5.
To
play,
skip or pause
the
track
,
use
the
native
controls
on
the
connected
Bluetooth
device
.
6.
Audio
played
through
the
connected
Bluetooth
device
will
now
be
heard
through
the
speakers
.
7.
To
adjust
the
volume
,
press the
/-
button on the alarm clock
.
9.
SNOOZE/SLEEP
button
10.
TUNING
>
button
11.
TIME SET
button
12.
ALARM 2
button
13.
MIN/VOL+
button
14.
HOUR/VOL-
button
15. USB charging port
16.
DC 5V
jack
1 2 3
4 5 6 7 8
9
10
11
12
13
14
15 16
