Features
SPC276 Digital Alarm Clock with
Bluetooth & Sleep Sounds
1. PM indicator
2. Alarm indicator
3. TIME button
4. SOUND button for sleep
5. BLUETOOTH button
6. ALARM button.
7. SNOOZE / DIMMER / SLEEP TIME / VOLUME (Rotary Dial)
8. SLEEP mode LED
9. BLUETOOTH LED
10. DC 5V jack
11. Battery compartment
Care of Your Clock
• Replace the back up battery annually, or store the clock without a battery.
When not in use. A soft cloth or a paper towel may be used to clean your clock.
Do not use any corrosive cleanser or chemical solutions on the clock. Keep the clock
clean and dry to avoid any problems.
Power Supply
• Insert the AC adapter into a 120V AC ~ 60Hz mains outlet and the other end of the
cord into the
DC 5V
jack on the back of the unit.
Setting the Time
• Press and hold the
TIME
button for 2 seconds to activate time setting,
the hour digit will flash. Use the
DIAL
to rotate to the correct hour.
The PM indicator will appear when the hour is advanced into the PM time.
• After the hour is set, press the
TIME
button again, the minute digits will flash.
Use the
DIAL
to rotate to the correct minute.
• Press the
TIME
button to save and exit the time setting or automatically save and
exit after 20 seconds without any action.
Setting the Alarm
• Press and hold the
ALARM
button for 2 seconds to activate alarm setting,
the hour digit will flash. Use the
DIAL
to rotate to the correct hour.
The PM indicator will appear when the hour is advanced into the PM time.
• After the hour is set, press the
ALARM
button again, the minute digits will flash.
Use the
DIAL
to rotate to the correct minute.
• After the minute is set, press the
ALARM
button again, the display will show 10
(default alarm volume is 10, max 16) use the DIAL to adjust the volume. As you
rotate the
DIAL
the volume of the beep will correspond to the number on the display.
• Press the
ALARM
button to save and exit the alarm setting.
Using the Alarm
• Press the
ALARM
button, the
ALARM
indicator will light on the display and will
sound at the preset time.
• Press the
ALARM
button again, the
ALARM
indicator will no longer be visible and
the alarm will remain OFF.
Snooze Function (rotary dial button)
• When the wake-up alarm is sounding press
SNOOZE/DIMMER
dial to activate the
SNOOZE
, this will cause the alarm to pause and the alarm will sound again in 9
minutes. This will happen each time when the
SNOOZE/DIMMER
dial is pressed.
Dimmer Function (rotary dial button)
• Press the
SNOOZE/DIMMER
DIAL
to use the display
DIMMER
. There are
FIVE
levels of display brightness: 100% / 50% / 25% / 10% / 5%
(100% brightness is the default setting)
Battery Backup
• Remove the
BATTERY DOOR
and insert 2 new “AAA” batteries (not included) in the
direction of the polarity symbols.
• Please make sure the batteries are new and inserted correctly.
• The battery will hold the
ALARM
and
TIME
settings if the power is interrupted.
There will be no display under battery power and the
ALARM
will sound at the
correct time. If there is no battery and the power is interrupted, the display will
flash 12:00 and the
ALARM
/
TIME
will need to be reset.
Volume Control (rotary dial button)
• When playing a
SLEEP SOUND
or using
BLUETOOTH
, rotate the
DIAL
to increase or
decrease the volume. The display will show the current volume level
(volume level 0-16).
Sleep Timer Function (rotary dial button)
• When playing a
SLEEP SOUND
or using
BLUETOOTH
, press and hold the
DIAL
and
rotate to set the
SLEEP
timer for 90 / 60 / 30 minutes. Release the dial when your
desired
SLEEP
time is shown and press the dial again to confirm.
The
SLEEP SOUND
or
BLUETOOTH
will automatically turn OFF to the set time.
• To view the remaining
SLEEP
time press the
DIAL
and the display will show the
remaining sleep time.
NOTE:
The dimmer function will not operate when the sleep timer is active.
Bluetooth Function
• Press the
BLUETOOTH
button to enter
BLUETOOTH
mode. The
PAIRING
indicator
will flash blue quickly. Using the native controls on your Bluetooth device
(e.g. smartphone), select “
SHARP
” in your Bluetooth settings to pair.
• When successfully paired and connected, the
PAIRING
Indicator will display a solid
blue light and a chime will sound from the unit.
• After initial pairing, the unit will stay paired unless unpaired manually by the user
or canceled due to a reset of the Bluetooth device.
• Use the native controls on the connected Bluetooth device to select a track.
• To play or skip the selected track, use the native controls on the connected
Bluetooth device.
• Audio played through the connected Bluetooth device will now be heard through
the speakers.
• To adjust the volume, rotate the
DIAL
on the top of the unit.
• To turn off
BLUETOOTH
mode, press and hold the
BLUETOOTH
button for 2 seconds.
Playing Sleep Sounds
• To play soothing
SLEEP SOUNDS
press the
SOUND
button.
• Press the
SOUND
button again to cycle through the other sounds.
(White Noise / Pink Noise / Brown Noise / Rain / Thunder / Ocean)
• To adjust the volume, rotate the
DIAL
on the top of the unit.
• To turn off
SLEEP SOUNDS
, press and hold the
SOUND
button for 2 seconds.
1
2
3 4
5 6
9
8
7
11
10
