background image

– 6 –

IM-MT899H/IM-MT899W

OPERATION MANUAL

Using with the Rechargeable Battery

Charging

When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.

When the portable MD is turned on or operating, the
battery will not be charged.

No operation can be performed whilst charging. If you
try to operate, "CH" will appear.

After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.

Caution:

Use the specified battery AD-N55BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.

If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.

Do not disassemble the battery.

1

Insert the rechargeable battery.

2

Connect the AC adaptor.

3

Place the unit on the battery charger.

Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.

Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.

Summary of Contents for IM-MT899W

Page 1: ...arged or used it will get slightly warm This is normal Caution Use the specified battery AD N55BT only Do not charge a battery nickel cadmium alkaline etc other than that specified If the rechargeable battery terminal is dirty charging may not start In such a case wipe off the dirt with a dry cloth Do not disassemble the battery 1 Insert the rechargeable battery 2 Connect the AC adaptor 3 Place th...

Page 2: ... the recording time If the MiniDisc is recorded or edited repeatedly or it has scratches recording skips scratched parts you may not be able to record the maximum number of tracks described above If the total number of character information disc group and track names exceeds 1 700 the MD cannot be edited The remaining recording time does not in crease even though you erased tracks The unit does no...

Page 3: ...d Is the unit connected properly to the other equip ment Is the AC adaptor unplugged or did a power failure occur whilst recording or editing Is the unit in the hold mode Is an optical signal being output from the stereo sys tem Read the operation manual for the stereo sys tem The battery cannot be charged Is the rechargeable battery in the unit Is the terminal dirty Group functions cannot be used...

Page 4: ...as run down LOCKED You removed a MiniDisc whilst record ing or editing Turn off the power before removing the MiniDisc Number or symbol appears in position If the operation is not accepted may be displayed on the main unit For details refer to the display on the remote con trol ERROR MES SAGES MEANING N FULL The number of a disc group or track name exceeds 40 Shorten the name NoDISC A disc has not...

Reviews: