background image

Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP
product.

PORTABLE CD STEREO SYSTEM

MODEL

QT-CD180

NOTE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.

NOTES

It is the intent of Sharp that this product be used in full compliance
with the copyright laws of the United States and that prior permis-
sion be obtained from copyright owners whenever necessary.

The letters in brackets contained in the model number indicate the
color of the product only. Operation and specifications are unaffected.

FOR YOUR RECORDS

For your assistance in reporting this unit in case of loss or theft, please record
below the model number and serial number which are located on the bottom of the
unit.
Please retain this information.

Model number

.................................................................................

Serial number

.................................................................................

Date of purchase

.................................................................................

Place of purchase .................................................................................

OPERATION MANUAL

Quick Guide / Guía rápida ............. Pages 10-11 / Página 10-11

Summary of Contents for CD180













Reviews: