Instruction
Manual
Convenient Opening of the
Door
Simple operation via card and
passcode
Automatic card recognition
feature
Convenient card recognition when
contacting the card
Dual-Authentication
Feature
Dual-Authentication feature through
card and passcode
Dual-Lock Feature
With dual-lock feature, the security
is enhanced
Fire Detection Feature
Built-in fire detection sensor
Crime prevention feature
when going outside
Alarm feature for inside activation
when going outside
Internet Home Page
SamsungSNS(Inc.)
ServiceCenter
Representative
PhoneNumber
Anywhere in the country
If you accurately provide the product name,
fault condition, and contact number, then
we will always provide kind assistance and
quick service to customers' questions.
Precautions for Safety
Warning
Precautions for safety protect the user's safety and prevent damages
and inconvenience due to accidents. Please read this and use the
product properly.
Do not install or repair the product
randomly as you want.
Properly fit the battery into the product
onto its accurate (+/-) terminals. When
the battery is incorrectly placed in its
direction or charge as displayed into
the battery room, leakage and breakage
may occur, so please be careful.
When the battery life is ended, replace
all the batteries at once, and avoid
using new and used batteries at the
same time.
When cleaning the product, do not
wipe it with water, benzene, or alcohol,
and instead, use a dry cloth.
Replace the batteries to new ones
within one week of first hearing the
battery replacement notification alarm.
Do not install the product in a location
where the gap between the door and
doorframe is more than 5mm.
Cautiously manage the passcode so
that other people cannot know it, and
regularly change the number.
Do not operate the product when your
hand is wet, and be careful to not let
water, beverages, and other liquid to
get inside the product.
Do not forcibly press or use a sharp
tool to hit the button.
When you are going out, always check
the ensure that the door was fully
locked.
Product Components
Product components may be changed depending on the
installation environment.
Outside of Main Unit
Inside of Main Unit
Number Keypad
Turned Off
Number Keypad On
Number Keypad
Battery replacement
notification
External Power
Contact Area
Registration Button
OPEN Button
Manual Switchgear
Deadbolt
Deadbolt
Door Opening Sensor
Automatic/Manual
Lock Conversion
Switch
Card Recognition Area
Reset hole
Number Keypad
Touch
Doorframe Strike Plate
(Strike)
Key-Tag (2EA)
'AA' Battery (LR6) (4EA)
Spacer
Instruction Manual
Installation Screw
Installation
Paper Diagram
Fixed Panel
Names and Features (Intside)
Opening the cover of the main unit on the inside
Gently press the battery cover of the main unit on the inside
and pull the cover in the direction shown in the arrow.
Opening the door from the outside
(passcode)
Opening the door from the outside
(card, key tag)
Passcode Registration
Opening and closing the door from
the inside
When the product is first purchased, it is set in dual-security
mode. To set the product into normal mode, please refer to
the 'dual-security mode setting" method.
Passcode can be registered in 4~12 digits, and only one
can be registered to use.
When the product is first purchased, it is set in automatic
detection mode. To set it to manual detection mode, please
refer to "card automatic/manual detection setting" method.
Card and Key Tag Registration
When card or key tag is registered, previously registered card
and key tag information are all deleted, so try to register all
cards and key tags at once. Total of 20 card keys and key tags
can be registered (ISO 14443 Type A support)
[Number Keypad] is touched.
Contact the card and key tag
to the [card recognition area].
The door will open within one
second.
1. Tuch the [Number keypad]
Automatic
Detection
Mode
Manual
Detection
Mode
1. Press the [Register] button. 2. Register the new passcode.
1. Press the [Register] button.
3. End card key registration
2. Contact card and key tag.
Open the battery cover and shortly
press [register] button.
Enter the new passcode (4~12
digits) and press the [*] button.
Open the battery cover and shortly
press [register] button.
Contact the card or key tag that
needs to be registered.
To end registration, press the
[register] button of the main unit on
the inside.
Electrically opening the door Electrically closing the door
Mechanically opening the
door
Mechanically closing the
door
Two buttons randomly lit up,
so press the two numbers in
the sequence.
Touch the [number pad]
When the number pad is lighted up,
contact the card or key tag in the
[card recognition area].
After 1 seconds, the door is opened.
With the door locked, pressing
the [OPEN] button of the main unit
on the inside opens the door.
With the door manually locked,
pressing the [OPEN] button of the
main unit on the inside locks the
already closed door.
With the door locked, turn the
manual switchgear to direction.
With the door closed in manual
lock status, turn the manual
switchgear to direction.
When all of the lights in the
number keypad show up, enter
the passcode and press [*]
button.
When all of the lights in the number keypad show
up, enter the passcode and press [*] button.
Success :
↑‘Beelililic’ melody
Fail : Short beep~
Success :↑‘Beelililic’
Fail : Short beep~
Beep
Beelililic
Beep
Beelililic
↑Beelililic
Success : ↑‘Beelililic’ melody
Fail : Short beep~
2. Enter the passcode.
Dual-security mode
Reference
Reference
Passcode must be entered when the number keypad is lighted up,
so if the lights are not on, then touch the [number keypad] and then
re-enter the passcode.
When the passcode is incorrectly entered to cancel the input, press
the [ ]button and start from the beginning.
If the passcode is incorrectly entered for five consecutive sounds, a
different alarm sound is played for about 10 seconds, and the
operation of doorlock is paused for roughly 3 minutes. During the
operation pause status, "beep" sound is played every 10 seconds,
and after 3 minutes, a long "beep" sound is played, and the pause
status is automatically disabled.
In the case of a card or a key tag which is not recognized
automatically, the door will be open after touch the number
pad and place it.
Warning
You must carry or keep at least one
emergency key outside.
In the case of an emergency, please
read and learn the instruction for
manual switchgear.
Names and Features (Outside)
↑Beelillic
↓Beellic
※ All registration and setting up can only
be operative while the door is open.
Caution
Caution
To prevent theft accidents, it is recommended to use the passcode
that is 6 digits or longer (only 0~9 numbers are usable).
Please be careful to manage the passcode so that other people will
not know. Using the same passcode for a long period of time may
lead to its exposure, so regularly change the passcode for use.
Registered passcode cannot be deleted, so register a new passcode
to use.
Check with the new passcode to see if the passcode was registered
normally, and then close the door.
To register various cards and key tags continuously, register the card or
key tag, and contact another card or key tag within 10 seconds. If another
card or key tag is not registered within 10 seconds, the registration
automatically ends.
To check if the card or key tag is normally registered, check the card and
key tag, and then close the door.
"Samsung SNS Doorlock" abides to the "ISO 14443 Type A standards, and
the cards, key tags, and NFC-use smartphones that completed
certification from "Samsung SNS Doorlock" are able to be registered on the
doorlock for use.
