Gamepad
Type E. AXXXXX
09/2013. Rev. 1.0
www.samsung.com
This manual’s images and content may differ from the
product.
Overview
Charging the device
Use a charger to charge the battery before using the
device for the first time. Connect the device and the
charger, and then plug the charger into an electric
socket.
The charger and the charging cable are sold
separately.
Turning the device on or off
Slide the power switch to turn the device on or off, or
enter Pairing mode.
Checking the indicator light
Monitor the device’s condition by checking the indicator
light.
Device status
Status
Indicator light
Turned off
Turns off.
Turned on
Flashes blue four times.
In Pairing mode
Turns blue for 3 minutes.
Bluetooth
Connected
Flashes blue three times.
Bluetooth
Disconnected
Flashes blue times.
Battery power
is low
Flashes red continuously.
While charging
Turns red.
Battery status
Press and hold the select button when the device is
turned on.
Status
Indicator light
Above 80%
Flashes blue five times.
20%-80%
Flashes yellow five times.
Below 20%
Flashes red five times.
Pairing and connecting the device
When using a new smartphone, you need to pair it
with the device. Once pairing is complete, the device
attempts to reconnect each time you turn it on.
Option 1: Manual Pairing
1
Slide the power switch all the way to the right for 3
seconds to enter Pairing mode.
•
The indicator light turns blue for 3 minutes.
2
Activate the Bluetooth feature on the smartphone,
scan for the device, and then select the device
name “Samsung Game Pad EI-GP20” from the list
of available devices. For more details, refer to the
mobile device’s user manual.
Option 2: Pairing via NFC
1
Activate the NFC and Bluetooth feature on the
smartphone. Make sure to unlock the smartphone
before using the NFC feature.
2
Turn the device on, and then the device’s back, the
NFC logo, to the smartphone’s NFC antenna until
NFC pairing completes.
•
Some of NFC-enabled devices may not support
this feature.
•
To locate the mobile device’s NFC antenna and
activate NFC, refer to the mobile device’s user
manual.
Reconnecting and disconnecting
Reconnecting
If the connection is lost while in use, press any button or
use the Bluetooth menu on the smartphone.
Make sure the device is turned on, and the
smartphone’s Bluetooth feature is activated.
Disconnecting
Turn off the device or use the Bluetooth menu on the
smartphone.
Attaching a smartphone to the device
1
Pull out the holder from the device.
Do not pull out the holder excessively. Doing so may
damage the device.
2
Slide the smartphone into the holder until it is fixed
firmly as shown in the image below.
The device is suitable for 4”-6.3” Samsung
smartphones.
Off
On
Pairing mode
Power switch
Charging jack
Indicator light
Holder
Select button
EI-GP20_UM_E_Eng.indd 1
2013-09-03 오후 5:12:28
