background image

 

Warning

User must use shielded signal interface cables to maintain FCC compliance for the product. Provided 
with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable 
for connection to any UL listed personal computer with similar configuration. Before making the 
connection, make sure the voltage rating of the computer convenience outlet is the same as the 
monitor and that the ampere rating of the computer convenience outlet is equal or exceeds the 
monitor voltage rating. For 120-volt applications, use only UL listed detachable power cords with 
NEMA configuration 5-15P type (parallel blades) plug caps. For 240-volt applications use only UL 
listed detachable power supply cords with NEMA configuration 6-15P type (tandem blades) plug 
caps. This television receiver provides display of television closed captioning in accordance with 
Section 15.119 of the FCC rules. (TV broadcast receivers with picture screens 13 inches or larger in 
diameter models only)

RF Radiation Exposure Statement

This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with a minimum distance of 20cm 
between the radiator and your body. This transmitter must not be co-located or operating in 
conjunction with any other antenna or transmitter.

  ICES-003 Class B Notice - Avis NMB-003, Classe B  

This Class B digital apparatus complies with Canadian standard ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

  VCCI Class B Notice  

この装置は、情報処理装置等電波障害自主規制協議(VCCI)の基準に基づくクテスB情報技術装置で

す。

この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受

信機に近接して 使用されると、

受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをして下さい。

  警告使用者  

這是甲類資訊類產品,在居住環境中使用時,可能會造成射頻幹擾,在這種情況下,
使用者會被要求採取某些適當的對策。

  European Notice (Europe Only)  

Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low 
Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.

Compliance with these directives implies conformity to the following European Norms:

EN55022: Radio Frequency Interference

 

EN55024: Electromagnetic Immunity of Information Technology Equipment

 

EN61000-3-2: Power Line Harmonics

 

EN61000-3-3: Voltage Fluctuations

 

EN55013: Radio disturbance characteristics of broadcast receivers and associated equipments

 

EN55020: Electromagnetic immunity of broadcast receivers and associated equipments

 

Your Samsung product compliance class is marked in the user manual.

Federal Communications Commission (FCC) - USA

 

Industry Canada Equipment Standard for Digital Equipment (ICES-003) - Canada

 

Voluntary Control Council for Interference (VCCI) - Japan

 

Bureau of Standards Metrology and Inspection (BSMI) - Taiwan

 

Ministry of Information and Communication (MIC) - Republic of Korea

 

Italian Post Ministry (Homologation) - Italy  

 

  FCC Class B Notice  

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions:

This device may not cause harmful interference, and

11 

This device must accept any interference received, including interference that may cause 

21 

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from that to which the receiver 

 

is connected.
Consult the dealer or an experienced radio/TV technician for help.

 

User Information

Changes or modifications not expressly approved by the party responsible for compliance could void 
the user’s authority to operate the equipment. If necessary, consult with your dealer or an experienced 
radio/television technician for additional suggestions. You may find the booklet called “How to Identify 
and Resolve Radio/TV Interference Problems” helpful. This booklet was prepared by the Federal 
Communications Commission. It is available from the U.S. Government Printing Office. Washington, 
DC 20402, Stock Number 004-000-00345-4.

The party responsible for product compliance:

SAMSUNG ELECTRONICS CO., LTD.
America QA Lab of Samsung
3351 Michelson Drive
Suite #290, Irvine, CA 92612 USA

Regulatory Compliance Statements  

Reviews: