features
dimensions
DTS900
DTS900M
DTS900 & DTS900M
Temperature Sensor
Installation Manual
………
Wide measurement range
- 0º to 50ºC, ac/- 1ºC
Available with or without user adjustable knob
Status LED
- Indicates Heating, Cooling, Idle modes
Many Adjustable Parameters
- Including top and bottom set
points, hysteresis, on and off timers
1 x RS485 DyNet Port -
Available on a 5 way screw terminal
strip
Powerful Internal PLC -
Custom scripts can be written to
provide process control based on conditional logic and
protocol translation between Dynalite’s DyNet and other
protocols
Powered from the DyNet Network
–
No need for an
external power supply
Read Instructions
– We recommend that you read this
Instruction Manual prior to commencement of installation.
Special Programming
– This device will only operate in basic
modes unless programmed via a computer. If programming is
required, contact your local agent for details.
Installation Location
– Install on a vertical surface in a dry
location, at chest height.
RS485 Data Cable
– Use screened, stranded RS485 data cable
with three twisted pairs. Segregate from mains cables by 300mm
mini
mum. Connect devices in a ‘daisy chain’. A data cable that is
connected to an energised device is live. Do not cut or terminate
live data cables.
important notes
