background image

Operating Instructions

Hearing Instrument R1-W   

Model No. 

WH-R17C

Model No. 

WH-R15C

Model No. 

WH-R13C

Before using the Panasonic Hearing Instrument R1-W series, please be aware of the following restrictions:
· R1-W series cannot be used outside the United States.

The information contained in this manual is important for safe and reliable operation. Anyone who will handle, maintain, 
store, or dispose of your hearing instrument should read this document. Carefully read and thoroughly understand this 
entire document before attempting to set up and operate the hearing aid. Failure to follow the operating instructions may 
result in poor performance of the hearing aid or even can result in serious and sometimes permanent bodily injury. 
Keep this document for future reference. If you have any questions, consult the dispenser where you purchased your hearing aid. 

The Limited Warranty document is enclosed together in the package. Keep it in a secure place. Make sure that it is 
properly completed, signed with the authorized dispenser’s name, and filled in with date of original purchase, name of 
dispenser and other important information.

Summary of Contents for WH-R13C





























































Reviews: