1
2
3
4
5
RQT0A31-1B
F0515HA2055
Connect
Turn On Unit
Do not connect
the LAN cable.
Operating Instructions <Setup>
Wireless Speaker System
Model No.
SC-ALL2
Thank you for purchasing this product. Please read these instructions
carefully before using this product, and save this manual for future use.
This manual contains quick set up information. More detailed
instructions are contained in “Operating Instructions <Full version>”
which can be downloaded at the bottom right links.
Wait until the network
indicator stops blinking
blue/red...
...and starts to blink
only blue slowly*.
Configure with Smartphone/Tablet
Go to wireless
settings on
your
smartphone
or tablet.
Select
“ALL2
_AJ”
*.
* This can sometimes take 1
minute to appear.
Name your device
e.g. Kitchen, Lounge or
whatever you would like
it to appear.
Select your network.
(enter password if needed)
Wait a few seconds and...
...you’re connected!
*
* After a short wait, your smartphone/
tablet should be automatically
reconnected to your Wi-Fi
®
network.
In case you are not reconnected
automatically, please re-select your
Wi-Fi network from the settings /
Wi-Fi settings menu on your device.
NOTE:
• If this operation does not work
correctly, please repeat it several
times.
• If you encounter an error message
asking you to reconfigure your
router to WPA2
TM
security, please
refer to your router’s manual or
contact your service provider for
instructions on how to do this.
NOTE: If this page is not
automatically displayed, type
“http://172.19.42.1/” into your
internet browser URL address
field.
The network indicator
lights up solid blue.
Download App
Download the free
“Panasonic Music
Streaming” app
[iOS]
: App Store
[Android]
: Google Play
TM
Stream your music
Further Support
If you require further help
please visit
http://panasonic.jp/support/
global/cs/audio/ALL/
index.html
or scan the QR code for FAQs,
video tutorials and Operating
Instructions<Full version>
(This site is in English only.)
Settings
Wi-Fi Settings
* The blinking in blue starts
after approximately
1 minute. If the blinking in
blue does not start, perform
a network reset (see below -
Network Reset).
Network Reset
1 Touch and hold [NET] and [1] for
more than 4 seconds, “-- --” on
the display will start blinking.
2 Touch [NET] within 10 seconds,
the network indicator starts
blinking blue/red.
For details on the app, refer to the site below. (These sites are in English only.)
[iOS]
: http://panasonic.jp/support/global/cs/audio/app/music_streaming/ios/
[Android]
: http://panasonic.jp/support/global/cs/audio/app/music_streaming/android/
SC-ALL2-EGEB-QSG~RQT0A31-B.book 1 ページ ２０１５年５月１８日 月曜日 午後１時４６分
