background image

Please check and identify the supplied accessories.

To order accessories, contact the dealer from whom you 
have made your purchase.
1 x USB charging cord
1 x Detachable cord

Clean this unit with a dry and soft cloth.
• Do not use solvents including benzine, thinner, alcohol, kitchen 

detergent, a chemical wiper, etc. This might cause the exterior 
case to be deformed or the coating to come off.

Keeping the battery performance.
• During the long period of disuse, full charge this unit once every 

6 months to keep the battery performance.

Basic Operating Instructions

Digital Wireless Stereo Headphones

RB-M700B

Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.

GE

Model No.

EU

Panasonic Corporation

http://www.panasonic.com

© Panasonic Corporation 2020

Panasonic Corporation  
Kadoma, Osaka, Japan
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany 

 

Manufactured by:

Authorized Representative in Europe:

TQBM0661

F0220MH0

More detailed operating instructions 
are available in “Owner’s Manual 
(PDF format)”.
To read it, download it from the 
website.
https://panasonic.jp/support/global/
cs/accessories/oi/rb_m700b/
• Click the desired language.

Expressions used in this document

• The product illustrations may differ from the actual product.

Accessories

Maintenance

Unit

• Avoid using or placing this unit near sources of heat.
• Do not listen with this unit at high volume in places where you 

need to hear sounds from the surrounding environment for safety, 
such as at railroad crossings, and construction sites.

• Wide band characteristic voltage equal or larger than 75 mV.
• Keep this unit away from something susceptible to the magnetism. 

Such devices as a clock may not operate correctly.

• When using this unit in an airplane, heed the instructions given by 

the airline company. Some airlines may forbid your using the unit. 
For further details, contact the airline you will be flying with.

Allergies

• Discontinue use if you experience discomfort with the ear pads or 

any other parts that directly contact your skin.

• Continued use may cause rashes or other allergic reactions.

Precautions for listening with the Headphones

• Excessive sound pressure from earphones and headphones can 

cause hearing loss.

• Do not use your headphones at a high volume. Hearing experts 

advise against continuous extended play.

• If you experience a ringing in your ears, reduce volume or 

discontinue use.

• Do not use while operating a motorised vehicle. It may create a 

traffic hazard and is illegal in many areas.

• You should use extreme caution or temporarily discontinue use in 

potentially hazardous situations.

Before requesting service, make the following checks. If you are in doubt 
about some of the check points, or if the remedies indicated in the chart 
do not solve the problem, consult your dealer for instructions.

No sound.

• Make sure that the unit and the Bluetooth

®

 device are connected 

correctly. 

(

l

Rear page,

 

)

• Check if music is playing on the Bluetooth

®

 device.

• Make sure that the unit is turned on and the volume is not set too low.
• Pair and connect the Bluetooth

®

 device and the unit again. 

(

l

Rear 

page,

 

)

• Check if the Bluetooth

®

 compatible device supports “A2DP” profile. For 

details on profiles, see “Listening to music” in “Owner’s Manual (PDF 
format)”. Also refer to the operating manual for the Bluetooth

®

 

compatible device.

Cannot adjust the volume.

• The control button does not work when the detachable cord (supplied) is 

used.

Low volume.

• Increase the volume of the unit. 

(

l

Rear page,

 

)

• Increase the volume on the Bluetooth

®

 device.

Sound from the device is cut off. / Too much noise.

 

/ Sound quality is 

bad.

• Sound may be disrupted if signals are blocked. Do not fully cover this 

unit with the palm of your hand, etc.

• The device may be out of the 10 m communication range. Move the 

device closer to this unit.

• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device when not in use.

The device cannot be connected.

• Delete the pairing information for this unit from the Bluetooth

®

 device, 

then pair them again. 

(

l

Rear page,

 

)

You cannot hear the person on the other end of the call.

• Make sure that the unit and the Bluetooth

®

 enabled phone are turned 

on.

• Check if the unit and the Bluetooth

®

 enabled phone are connected. 

(

l

Rear page,

 

)

• Check the audio settings of the Bluetooth

®

 enabled phone. Switch the 

calling device to the unit if it is set to the Bluetooth

®

 enabled phone. 

(

l

Rear page,

 

)

• If the volume of the other person’s voice is too low, increase the volume 

of both the unit and the Bluetooth

®

 enabled phone.

Cannot make a phone call.

• Check if the Bluetooth

®

 compatible device supports “HSP” or “HFP” 

profile. For details on profiles, see “Listening to music” and “Making a 
phone call” in “Owner’s manual (PDF format)”. Also refer to the 
operating manual for the Bluetooth

®

 enabled phone.

The unit does not respond.

• This unit can be reset when all operations are rejected. To reset the unit, 

connect the unit to a computer using the USB charging cord. (The 
pairing device information will not be deleted.)

Cannot charge the unit. 

• Is the USB port you are currently using working properly? If your 

computer has other USB ports, unplug the connector from its current 
port and plug it into one of the other ports.

• If the measures mentioned above are not applicable, unplug the USB 

charging cord and plug it in again.

• If the charge time and operating time become shortened, the battery 

may have run down. (Number of charging times of the installed battery: 
Approximately 300)

The power/pairing LED does not light during charging. / Charging 
takes longer.

• Is the USB charging cord connected firmly to the USB terminal of the 

computer? 

(

l

Rear page,

 

)

• Make sure to charge in a room temperature between 10

o

C and 35

o

 

(50

o

F to 95

o

F).

The power does not turn on.

• Is the unit being charged? The power cannot be turned ON during 

charging. 

(

l

Rear page,

 

)

The audio guidance language has changed.

• The audio guidance language can be switched.

(Press and hold [

] and [

j

] at the same time for at least 5 seconds.)

General

Bluetooth

®

 section

Headphone section

Speaker section

*1 It may be shorter depending on the operating conditions.
*2 The time required to charge the battery from empty to full.
• Specifications are subject to change without notice.

Safety precautions

WARNING:

To reduce the risk of fire, electric shock or product damage,
• Do not expose this unit to rain, moisture, dripping or 

splashing.

• Do not place objects filled with liquids, such as vases, on 

this unit.

• Use the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to 

qualified service personnel.

Avoid the use in the following conditions

• High or low extreme temperatures during use, storage or 

transportation.

• Disposal of a battery into fire or a hot oven, or mechanically 

crushing or cutting of a battery, that can result in an explosion.

• Extremely high temperature and/or extremely low air pressure 

that can result in an explosion or the leakage of flammable liquid 
or gas.

This unit may receive radio interference caused by mobile 
telephones during use. If such interference occurs, please 
increase separation between this unit and the mobile telephone.

Use only the supplied USB charging cord when connecting to a 
computer.

This unit is intended for use in moderate and tropical climates.

1 Remove the right ear pad to view certification information.
2 Certification information (

a

) is indicated on the speaker plate 

portion (

b

), which becomes visible when the right ear pad (R 

side) is removed.

3 To attach the ear pad, fit the part 

d

 of the ear pad into the part 

c

.

If you pull the ear pad too much, the ear pad can tear.

Copyright notice
This product uses open source software based on the Free Software 
Foundation’s GPL and other conditions. The relevant conditions apply to 
the software. The license information for the GPL shown on this product 
and information about open source software are published on our 
website. The source code licensed under the conditions of the GPL is 
available publicly. Please note that these types of software are not 
covered by warranty. At least 3 years from sale of this product, 
Panasonic Corporation will give to any individual or group who contacts 
us, for a charge of no more than the cost of physically distributing source 
code, a complete machine-readable copy of the source code and the list 
of copyright notices corresponding to the GPL software covered under 
the conditions of the GPL usage agreement.
Refer to the following URL to make enquiries regarding the above 
mentioned content and for information on how to obtain the relevant 
source code:
https://panasonic.jp/support/global/cs/audio/download/index.html

1

2

3

Troubleshooting

Specifications

Power supply

DC 5 V, 300 mA
(Internal battery: 3.7 V 
(Li-polymer))

Operating time

*1

Approx. 20 hours
(Bass reactor: Off, Noise 
cancelling: ON, SBC)

Charging time

*2

Approx. 4 hours

Charging temperature range 

10

o

C to 35

o

C

Operating temperature range

0

o

C to 40

o

C

Operating humidity range

35 %RH to 80 %RH 
(no condensation)

Mass

Approx. 317

(without cord)

Frequency band

2402 MHz to 2480 MHz

Supported profiles

A2DP, AVRCP, HSP, HFP

Supported codec

SBC, AAC

Impedance

XX Ω (Power off, with cord)

Power handling capacity

1000 mW (IEC)

The Bluetooth

®

 word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation 
is under license.
Other trademarks and trade names are those of their respective owners.

Siri is a trademarks of Apple Inc., registered in the U.S. and other 
countries.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Other system names and product names appearing in this document are 
in general the registered trademarks or trademarks of the respective 
developer companies.
Note that the 

TM

 mark and 

®

 mark do not appear in this document.

D

D

E

D

D

D

B

B

until 

2020/2/10

Reviews: