background image

Order Number: MGCS041006C0

H13

Facsimile

UF-7000/8000
UF-7100/8100

[ Version 2.0 ]

This

 

service

 

information

 

is

 

designed

 

for

 

experienced

 

repair

 

technicians

 

only

 

and

 

is

 

not

 

intended

 

for

 

use

 

by

 

the

 

general

 

public.

It

 

does

 

not

 

contain

 

warnings

 

or

 

cautions

 

to

 

advise

 

non-technical

 

individuals

 

of

 

potential

 

dangers

 

in

 

attempting

 

to

 

service

 

a

 

product.

Products

 

powered

 

by

 

electricity

 

should

 

be

 

serviced

 

or

 

repaired

 

only

 

by

 

experienced

 

professional

 

technicians.

 

Any

 

attempt

 

to

 

service

 

or

 

repair

 

the

 

product

 

or

 

products

 

dealt

 

within

 

this

 

service

 

information

 

by

 

anyone

 

else

 

could

 

result

 

in

 

serious

 

injury

 

or

 

death.

WARNING

© 2004 Panasonic Communications Co., Ltd. 
All rights reserved. Unauthorized copying and distribution is
a violation of law.

Summary of Contents for Panafax UF-8000




























































































































































































Reviews: