background image

© 2007 Panasonic Home Appliances India Co., Ltd.
All rights reserved. Unauthorized copying and distri-
bution is a violation of law.

No.PHAI0712001CE

Super Mixer Grinder

Model No.

MX-AC300

Model No.

MX-AC220

Model No.

MX-AC210

Color: Grey/Blue
Destination: India

TABLE OF CONTENTS

PAGE

PAGE

1 Safety Precautions

-----------------------------------------------

2

2 Specifications

-----------------------------------------------------

3

3 Location of Controls and Components

-------------------

4

3.1. Accessories/Parts Identification------------------------ 4

4 Troubleshooting Guide

-----------------------------------------

5

5 Disassembly and Assembly Instructions

----------------

7

5.1. Rubber Cap, Connector U (lower)--------------------- 7
5.2. Bottom Plate ------------------------------------------------ 7
5.3. Power Cord U / Circuit Breaker ------------------------ 8
5.4. Switch Complete------------------------------------------- 9
5.5. Switch Complete B ---------------------------------------- 9
5.6. Motor Complete / Upper Body-------------------------10
5.7. Blender Jar Complete (Mill Cup Complete /

Chutney Jar Complete) ---------------------------------11

5.8. Lid C (Lid A)------------------------------------------------13

6 Wiring Connection Diagram

---------------------------------

14

6.1. Wiring Diagram--------------------------------------------14
6.2. Electric Circuit ---------------------------------------------14

7 Exploded View and Replacement Parts List

-----------

15

7.1. Parts Location (MX-AC300)----------------------------15
7.2. Replacement parts list (MX-AC300) -----------------16
7.3. Parts Location (MX-AC220)----------------------------18
7.4. Replacement parts list (MX-AC220) -----------------19
7.5. Parts Location (MX-AC210)----------------------------21
7.6. Replacement parts list (MX-AC210) -----------------22
7.7. Packing Procedure ---------------------------------------24

Summary of Contents for MX-AC300



























Reviews: