background image

OPERATING AND INSTALLATION

INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing this Panasonic product.
Please read these instructions carefully before attempting to install, operate or service 
the Panasonic product. Please carefully read the “IMPORTANT INSTRUCTIONS”. 
Failure to comply with instructions could result in personal injury or property damage. 
Please explain to users how to operate and maintain the product after installation, 
and this booklet should be presented to users. 
Please retain this booklet for future reference. 

Fan Heater

FV-0511VHL1

FV-0511VH1
FV-0511VHL1

Model  No.

FV-0511VH1

Contents

IMPORTANT INSTRUCTIONS
DESCRIPTION
UNPACKING
SUPPLIED ACCESSORIES
FEATURES
DIMENSIONS
INSTALLATION (WIRING DIAGRAM)
INSTALLATION (NEW CONSTRUCTION)
INSTALLATION (RETROFIT)
OPERATION
MAINTENANCE
PRACTICAL GUIDE TO INSTALLATION
SPECIFICATIONS
PRODUCT SERVICE

-----------------2~4

------------------------------------5

--------------------------------------6

-----------------------6

-------------------------------------6~7

-------------------------------------7

------------8

----8~11

--------------------12

-------------------------------------13

-----------------------------14~15

--BACK COVER

--------------------BACK COVER

-----------------BACK COVER

Summary of Contents for FV-0511VH1

















Reviews: