1
Easy Wireless Stick
Windows
Firmware Update Procedure
1. Introduction
Firmware update is performed by connecting the target Easy Wireless Stick to the USB port of a Windows or
Apple computer.
This firmware update procedure applies to the following product.
Product name
: Easy Wireless Stick
Product number : ET-UW100
This document describes how to perform update on a Windows computer.
Screen images from the Windows 7 operating system are used in this document as an example. Images used
in this document may differ from the actual screens.
For details on Windows and computer operations, refer to the instruction manual of your computer.
2. Preparation
2.1 System Requirements
A computer the meets the following requirements is necessary to perform firmware update.
OS
Microsoft Windows 7*
1
: Ultimate (32-bit/64-bit edition),
Professional (32-bit/64-bit edition),
Home Premium (32-bit/64-bit edition)
Windows 8.1 : Windows 8.1 Pro (32-bit/64-bit edition),
Windows 8.1 (32-bit/64-bit edition)
Windows 10 : Windows 10 Home (32-bit/64-bit edition),
Windows 10 Pro (32-bit/64-bit edition)
Interface
USB 2.0
CPU
Minimum specifications required by the OS or better
Memory
Minimum specifications required by the OS or better
*
1
Only SP1 is supported for Windows 7.
Notes
y
Administrator privileges are required to perform update.
y
Operation via a USB hub is not guaranteed.
y
Operation using a system other than that described above or using a home-built computer is not guaran-
teed.
Operation is not guaranteed on all computers that meet the above requirements.
TQBH0329-2
ENGLISH
