background image

Read these instructions completely before replacement.

TQZJ139-3

Information for Users on Collection and Disposal of Old Equipment and 

used Batteries

These symbols on the products, packaging, and/or accompanying 

documents mean that used electrical and electronic products and 

batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and 

used batteries, please take them to applicable collection points, 

in accordance with your national legislation and the Directives 

2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you 

will help to save valuable resources and prevent any potential 

negative effects on human health and the environment which 

could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products 

and batteries, please contact your local municipality, your waste 

disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in 

accordance with national legislation.
For business users in the European Union

If you wish to discard electrical and electronic equipment, please 

contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish 

to discard these items, please contact your local authorities or 

dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical 

symbol. In this case it complies with the requirement set by the 

Directive for the chemical involved.

 

Replacement Instructions

 

Lamp unit for LCD Projector 

 

Model No.

 ET-LAB80

R

Summary of Contents for ET-LAB80

Page 1: ...ore information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment ...

Page 2: ... handling it The lamp cover gets very hot and contact with it can cause burns Notes on replacing the lamp unit The light generating lamp is made of glass so dropping it or allowing it to hit hard objects may cause it to burst Be careful when handling the lamp Dispose of the removed the old lamp with the same care that would be taken with a fluorescent light A Phillips screwdriver is necessary for ...

Page 3: ... the lamp unit and gently remove the lamp unit from the projector 4 Insert the new lamp unit while making sure that the direction is correct and then use a Phillips screwdriver to securely tighten the 3 lamp unit fixing screws When inserting the new lamp unit be particularly sure to push it in at point A NOTE Be sure to install the lamp unit and lamp unit cover securely Lamp unit fixing screws Lam...

Page 4: ... button on the projector illuminates red 12 This will reset the cumulative usage time for the lamp unit to 0 13 Replace the air filter with the new filter which is supplied as an accessory while referring to the replacement procedure which appears in the Operating Instructions for the LCD projector NOTE If DIRECT POWER ON in the OPTION menu has been set to ON projection will start after the mains ...

Reviews: