background image

Thank you for purchasing this Panasonic product.

 Please read these operating instructions and the projector operating instructions carefully, and then use this product 

• 

correctly.

 Before using this product, be sure to read “Read this first!” (Page 2).

• 

 Please save this manual for future use.

• 

EEE 

Yönetmeliğine Uygundu

r.

EEE Complies with Directive of T

urkey

.

Replacement lamp unit

Operating Instructions

Model No.

ET-LAA310

Disposal of Old Equipment

Only for European Union and countries with recycling systems

This symbol on the products, packaging, and/or accompanying documents means that used electrical and 

electronic products must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points in 

accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative 

effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

TQZJ393-2

Summary of Contents for ET-LAA310

Page 1: ...ing systems This symbol on the products packaging and or accompanying documents means that used electrical and electronic products must not be mixed with general household waste For proper treatment recovery and recycling of old products please take them to applicable collection points in accordance with your national legislation By disposing of them correctly you will help to save valuable resour...

Page 2: ... lamp unit Grip the handle when you remove the lamp unit Some parts of the lamp unit are sharpened and may cause injury The lamp may be ruptured Care should be taken not to scatter pieces of the broken lamp glass when replacing the lamp unit Pieces of the broken lamp may fall from the lamp unit especially when the projector is mounted on the ceiling so when replacing the lamp unit do not stand dir...

Page 3: ...far For what to do if the top panel comes off see Care and replacement in Operating Instructions Functional Manual Use a Philips screwdriver to unscrew the lamp 4 cover fixing screw one until it becomes loose and then remove the lamp cover Slowly remove the lamp cover from the projector Lamp cover Lamp cover fixing screw Use a Phillips screwdriver to unscrew the lamp unit 5 fixing screws 2 screws ...

Page 4: ...r 16 Attach the air filter unit to the projector using the reverse of the procedure in 12 Insert the air filter unit into the projector in the direction of the arrow engraved into the air filter UP frame until it clicks into place Attach the air filter cover and firmly tighten the 17 air filter cover fixing screw one with a Philips screwdriver Insert the power plug into a power outlet and press 18...

Reviews: