Combination Rack
Model No. DVZHWJ0600
(
0900
)
-E
Instruction Manual
Installation Manual
This symbol is used to alert users to a
specific operating procedure that must be
followed in order to operate the unit safely.
This symbol is used to alert users to a
specific operating procedure that must
not be performed.
Denotes a potential hazard that could
result in serious injury or death.
Denotes a hazard that could result
in minor injury.
To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property,
always observe the following safety precautions.
These actions may cause failure of the
equipment or the unit to fall causing injury.
Combination Rack Main unit
Part
Quantity
Quantity
Part
Main unit mounting screw
Main unit mounting bolt
Flat-head screw
M6x33
Joint bolt
M4X16
Temporary locking screw
Blindfold cap
Instruction manual/
installation manual
Joint nut
2
2
1
2 each
4
1
●
Never disassemble, repair or remodel
the product.
●
Be sure to use the designated screws
to install the unit.
Otherwise, the unit may fall, and
accordingly injure you.
Installation Section
■To ensure correct installation, be sure to read these instructions
carefully before you install the Combination Rack.
Parts List
(Dimensional unit: mm)
Safety Precautions
Truss head tapping screw
4X14
Prohibited
Be sure to observe the following precautions.
Be sure
to
observe.
W900/600
WARNING
WARNING
CAUTION
■The following symbols are used to classify and describe the
level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
Explanation of symbols
■The following symbols are used to classify and
describe the type of instructions to be observed.
■Please properly dispose of the packing materials and
residual materials in accordance with legal provisions.
To Installer : Make sure to pass this integrated Precautions for Use to the customer after installation.
Make sure to pass this manual to customers after installation.