Model No. CF-C1 Series
This addendum includes revisions to the
Operating Instructions
and
Reference Manual
, as well as
supplementary information.
<Only for model with touchscreen>
About the title of the
Reference Manual
Read the title in the
Reference Manual
given in the
Operating Instructions
as follows.
Title given in the
Operating Instructions
Title given in the
Reference Manual
“Digitizer / Multi Touch Operation”
“Screen Input Operation”
Introduction
Replace “digitizer pen” with “stylus”.
Description of Parts
• Replace “digitizer pen” with “stylus”.
•
B: LCD/Digitizer
Replace “LCD/Digitizer” with “LCD/Touchscreen”.
First-time Operation
Preparation
The following accessory is NOT supplied.
• Digitizer Pen . . . . . . . . . . . . . . . . . 1
The following accessory is supplied.
• Stylus . . . . . . . . . . . . . . . . . . . . . . 1
Model No: CF-VNP017AU
Attached in the pen holder at purchase.
(
Reference Manual
“Screen Input Operation”)
Step 6: Perform the screen calibration
Replace the procedure with the following.
NOTE
•
Perform the following calibration for each user.
•
Rotate the display to primary landscape before performing the calibration.
A
Click
(start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B
Click [Calibrate].
C
If [User Account Control] is displayed, click [Yes].
D
Using the stylus, touch each of the “+” target marks one by one, and then click [Yes].
A
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].
B
Set the following with [Calibrate] in [Settings].
C
Using the stylus, touch each of the “+” target marks one by one, and then click [Yes].
Handling and Maintenance
When using the digitizer
Replace “digitizer” with “touchscreen”.
Replace “digitizer pen” with “stylus”.
FJ0810-0
DFQX1C17ZA
Printed in Japan
Addendum
CF-C1(DFQX1C17ZA)̲US̲Flyer.indd 1
CF-C1(DFQX1C17ZA)̲US̲Flyer.indd 1
2010/08/30 16:31:27
2010/08/30 16:31:27
