General
Power source *1
12 V DC/24 V DC
Power consumption
Max. 24 W
Ambient operating temperature
0 ºC to +40 ºC (32 ºF to 104 ºF)
Ambient operating humidity
30 % to 90 %
Dimensions
203 mm (W) x 190 mm (H) x 77 mm (D) (8" (W) x 7-1/2"(H) x 3-1/16"(D))
Weight
0.9 kg (1.98 lbs.) (this iris reader only)
Interface
Wiegand, RS-485
Network
10 Base-T/100 Base-TX (Auto negotiation)
Network protocol
TCP/IP
Available card reader for Iris on card system RWK400 (Manufactured by HID Corporation)
Input/Output
Iris Reader (BM-ET200)
Recognition start trigger input
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
Recognition result output1 (ACCEPT)
make contact output, Normally Open, Pulse width: 0.1 s to 60 s, 24 V DC,
100 mA, ON-Resistance 6
Ω
Audio Output (Preamplifier)
Stereo mini plug (ø3.5 mm)(10 k
Ω
, 100 mV[P-P])
High speed serial interface
Numeric Key, External memory (*5)
Interface Board (BM-ETA201)
(optional)
Dimensions
65 mm (W) x 76 mm (H) x 31 mm (D) (2-9/16" (W) x 3" (H) x 1-1/4" (D))
Alarm output1 (tamper detection)
Open collector output, Normally Open, Active low, 24 V DC, 24 mA
Alarm output2 (power status)
Open collector output, Normally Close (Low level), 24 V DC, 24 mA
Recognition result output2 (REJECT)
Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s,
24 V DC, 24 mA
Buzzer input:
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 200 ms or more
Time adjust input
0 V to 5 V, 24 mA (Max), Active low, Pulse width: 100 ms or more (*7)
Interface (card reader)
Wiegand, RS-485 (Either can be selected.)
Wiegand power output (card reader)
5 V DC, 100 mA max.
Wiegand DATA0 input(card reader)
0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 input (card reader)
0 V to 5 V DC, 25 mA max., Active low
RS-485 (A), (B) (card reader)
Differential input:
±
0.2 V or more,
Differential output:
±
2 V or more (When termination is ON) (*6)
Interface (access control panel)
Wiegand, RS-485 (Either can be selected.)
Wiegand power input (access control panel)
5 V DC (No connection available)
Wiegand DATA0 output (access control panel)
0 V to 5 V DC, 25 mA max., Active low
Wiegand DATA1 output (access control panel)
0 V to 5 V DC, 25 mA max., Active low
Wiegand ACCEPT-LED input (access control panel)
0 V to 5 V, 24 mA (Max.), Active low, Pulse width: 200 ms or more
Wiegand REJECT-LED input (access control panel)
0 V to 5 V, 24 mA (Max.), Active low, Pulse width: 200 ms or more
RS-485 (A), (B) (access control panel) Differential input:
±
0.2 V or more,
Differential output:
±
2 V or more (When termination is ON) (*6)
Video Surveillance Camera (BM-ETC202)
(optional)
Video Output
1 V [P-P] NTSC composite 75
Ω
BNC connector
Function
Iris recognition time
Approx. 0.3 seconds (After iris image capturing until the recognition
result is output) (*2)
Approx. 5 seconds (Server certification. After iris image capturing until
the recognition result is output) (*3)
Eye image capturing range
Approx. 30 cm to 40 cm (11-13/16" to 15-3/4") between the eyes and the mirror
Total number of users enrolled
BM-ET200
Stand alone mode : 50 users max. Network mode : 5,025 users max. (*4)
Iris server
10,025 users max.
Voice guidance
14 languages supported (English, German, French, Spanish, Italian,
Russian, Chinese, Korean, Portuguese, Turkish, Arabic, Dutch,
Swedish, and Japanese)
Mute, Simple (recognition result), and Full (voice guidance and
recognition result) selectable
Distance indicator
Lighting of the lamp indicates the proper distance between the user and the main body.
Live indicator
Blinking, On, and Off selectable
Angular field view
Horizontal: 115 º, Vertical: 85 º (Fixed)
(Video surveillance camera: BM-ETC202)
Security function
Tamper detection switch, Iris data encryption
Printed in Japan
BM-JHET200C(2P-549)
DISTRIBUTED BY:
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
PANASONIC PUERTO RICO INC.
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809) 750-4300
Panasonic System Solutions Company
Unit Company of Panasonic Corporation of North America
Security Systems
Website :
www.panasonic.com/security
For Customer Support :
call 1.877.733.3689
Executive Office :
Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Iris Reader
BM-ET200
MAJOR OPERATING CONTROLS
Front & Side View
Bottom View
1
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
11
12
6
7
8
9
10
1
APPEARANCE
Unit : mm (inch)
BM-ET200 SPECIFICATIONS
PRODUCT CONFIGURATION
Iris Reader
BM-ET200
Administration Software
BM-ES200
User License Software
BM-EU30100
(for 100 Users)
BM-EU31000
(for 1,000 Users)
BM-EU33000
(for 3,000 Users)
BM-EU35000
(for 5,000 Users)
RECOMMENDED SMART CARD READERS AND WRITERS
Applicable products Manufacturer
Product / Product No.
Smart Card Writer
HID Corporation Ltd.
RFIDeas, Inc.
HID Corporation Ltd.
RWK400 RW400
RFID1356i (USB and RS-232)
Smart Card
2001, 2011, 2021, 2031, 2041, 2051, 2061
This software supports the blank card only.
Combination high-speed capture engine
and two mirrors for rapid,
high-accuracy recognition.
203(8")
77(3-1/16")
190(7-1/2")
83.5
(3-5/16")
52
(2-1/16")
46
(1-13/16")
20.3
(13/16")
34
(1-5/16")
BM-ETA201
(optional)
BM-ETC202
(optional)
Interface Board
Video Surveillance Camera
Important
• In regard to details of the Smart Card Writer and the Smart card, refer to the
respective instruction manuals attached to merchandise.
• When a card writer is connected and a USB-RS-232C conversion connector is used,
the system may not operate normally.
• The USB connections are applicable to Windows
®
XP only. Operation is impossible
with Windows
®
2000.
• Private ID, and KnoWho are trademarks of Iridian Technologies, Inc., USA.
• iCLASS is a registered trademark of HID Corporation.
• Windows
®
2000 Professional, or Windows
®
XP Professional are registered trademarks of Microsoft Corporation in the USA and / or other countries.
• All other trademarks are the property of their respective copyright holders.
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
• All photographs and menu are simulated and shown for the purpose of explanation.
• Weights and dimensions are approximate. • Specifications are subject to change without notice. • This product is subject to export control regulations.
Distance Indicator
Front Panel
Mirrors
Eye Image Capturing Cameras
Audio Volume Controller
Video Surveillance Camera (Option)
Speaker
Results Indicator
Tilt Handles
Live Indicator
Front Cover
High Speed Serial Interface
*1 The third-party external power-supply should meet
the following specifications, and must be a UL Listed
access control power limited device.
Output voltage
Output current capacity
12 V DC
±
0.5 V
2 A or more
24 V DC
±
0.5 V
1 A or more
Rated ripple voltage/Ripple noise: 150 mV [P-P] or less
Overcurrent protection: Enabled (mandatory)
*2 The recognition time may differ depending on
recognition condition.
*3 The recognition time may differ depending on capturing
conditions, network conditions, or the total number of
enrolled users.
*4 User Licence Software BM-EU30000 Series (option)
is required.
*5 Refer to the dealer for available external devices.
*6 Our exclusive protocol is employed.
*7 Refer to the dealer for available external devices.