Getting Started
Network Camera
Model No.
BB-HCM403A
(PoE Ready)
Connect the Ethernet cable (customer-provided) to the camera.
Note
• Your PoE hub must be connected to the router. Refer to the manuals of the PoE hub for the instructions of the connection. Additionally, these instructions assume your PC is
already connected to the Internet and your network includes a router that is UPnP
™
(Universal Plug and Play) compliant.
Connect the Ethernet cable (customer-provided) to your PoE hub.
• If the camera's indicator does not light green, see pages 5-6 of the Troubleshooting on the CD-ROM.
• A noise can be heard during tilt operation. This is normal.
Note
• Use a 4-pair UTP/STP cable.
• Do not use a relay connector or a hub between the camera and the PoE hub. These
devices may disturb the data or electricity transmission.
• If the PoE hub has indicators, the indicator lights on as shown in table below.
• If the PoE hub is turned off or power supply is temporarily cut off by the disconnection
of the Ethernet cable, it may take time for the PoE hub's indicators to light green.
• The indicator display differs depending on manufacturers, refer to the manuals of the
PoE hub.
Ethernet (LAN) port
A "straight" Cat5 Ethernet cable
(customer-provided)
To your PoE hub
Ethernet
ports
To the power supply
A "straight" Cat5 Ethernet cable
(customer-provided)
To your router
To the camera
Indicator
LINK
PoE
Description
Turns on when the data is transmitted from the camera.
Turns on when the electricity is supplied to the camera.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15557ZA
KK0606JT0
Please read the Important Information before using.
Complete Operating Instructions are included on the
enclosed CD-ROM.
• This
Getting Started
manual explains how to connect and set up the
camera.
• Refer to the
Operating Instructions
on the
CD-ROM
for details regarding
the camera's features.
• See
Troubleshooting
manual on the
CD-ROM
if you cannot complete the
setup.
• Refer to the
Installation Guide
for mounting.
Trademarks
• Adobe, Acrobat and Reader are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
• Microsoft, Windows and ActiveX are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
• This software is based in part on the work of the Independent JPEG Group.
• Screen shots reprinted with permission from Microsoft Corporation.
• All other trademarks identified herein are the property of their respective owners.
Abbreviations
• UPnP is the abbreviation for "Universal Plug and Play".
• "Network Camera" is called "Camera" in this manual.
• "Setup CD-ROM" is called "CD-ROM" in this manual.
1.
Connect the camera, and turn the camera on.
Connect the camera to your PoE (Power over Ethernet) hub using a "straight" Cat5 Ethernet cable (customer-provided) to set up the camera.
• Before you begin the installation, the UPnP
™
feature in your router needs to be enabled. Usually, the default setting disables this feature. For more info, please visit,
http://panasonic.co.jp/pcc/products/en/netwkcam/
or contact your router's manufacturer.
Indoor Ceiling Use Only
PoE User: See below.
AC Adaptor (Model No. BB-HCA2A: Option) User: Go to page 2.
PoE User
