Created on: July 2, 2008
AFPX-COM5 Upgrade Procedure (1
st
Edition)
【
Please make sure to check before version upgrade.
】
[Introduction]
This is the procedure manual for upgrading Ver 1.00 of AFPX-COM5.
[Configuration setting]
1) Install the latest ConfiguratorWD.
The ConfiguratorWD (Ver 1.21) is used for version upgrade. If you are using an older version than
Ver1.21, please download the latest version from our website.
(Site URL
http://panasonic-denko.co.jp/ac/e/fasys/plc/plc/fp-x/software/index.jsp
2) Connect directly to a PC with an Ethernet cable.
Confirm that the Link/Act of AFPX-COM5 and the LED of SPD light up.
.
) Set an IP address that can be communicated with the PC.
-COM5
ll of PC.
Control Panel > Windows Firewall
Note) The LED of SPD turns off when connection has been established using 10BASE-T
3
[Recommended
setting]
IP address of PC
：
192.168.1.100
IP
address
of
AFPX
：
192.168.1.5
4) Disable the firewa
Start > Settings >
