background image

1

USB memory

USB memory

Computer

+

Authoring software

Display

LAN

Media Player

(SB-L008KU)

User's Manual  

Ver.1.10

Introduction

•What is Media Player?

Media Player is a tool for showing programs created from the combination of graphics and sound contents on a display. Programs are created
using the attached authoring software and distributed via LAN or USB memory.

•What is Authoring Software?

Layout setting

The desired layout can be set by combining movies, still images, and messages.

Scheduling function

This function displays the program at the designated time. You can set the daily program start and end time or the program start and end time for a
particular day.

Distribution function

Program data is distributed via USB memory or to a maximum of 20 Media Players via LAN.

Important Information

This equipment is a Class A Information Technology Equipment certified by the Voluntary Control Council for Interference by Information Tech-
nology Equipment (VCCI).

In a domestic environment this product may cause radio interference, in which case the user may be required to take corrective actions.

This equipment conforms to the VCCI standard when the enclosed signal cable is connected.

CAUTION

This device is certified as VCCI class A. When this equipment is attached to a Class B LCD display, the display’s VCCI mark will be changed from Class B to
Class A.

Refer to the “Safety Precautions, Maintenance & Recommended Use” of the LCD Monitor in the User’s Manual for notes on handling.

Message

Movie

Still image

Still image

Message

Summary of Contents for SB-L008KU































Reviews: