FAQ for Wireless Display Media Player SB-06WC
General
Question
Answer
Audio cannot be heard from the display.
[When the product is connected to a display]
• Set the audio input of the display to “OPTION”. To do so, press the AUDIO
INPUT button and set the selected audio input (AUDIO) shown at the top
right of the screen to “OPTION”.
• Set the AUDIO setting in the display OPTION to DIGITAL. To do so, press
the MENU button, select [ADVANCED OPTIONS] - [OPTION SETTING]
and set [AUDIO] to [DIGITAL].
• Check whether the switch for the external speaker and built-in speaker of
the display has been set correctly.
• Adjust the volume of the display.
[When the product is connected to a projector]
• Depending on the model of the projector, the audio output of the product
may not be supported. Check with your dealer regarding the specifications
of the projector.
The menu screen does not appear even
after startup.
• After startup, it takes about a minute for the menu screen of the product to
appear.
• After the splash screen appears, a blank screen will appear until the home
screen is displayed. This is due to the specifications of the product.
When the power lamp is flashing in red.
A failure may have occurred in the product. Please consult your dealer or
our after service support desk.
Intel
®
WiDi function
Question
Answer
The Intel
®
WiDi menu cannot be selected in
the home screen.
• Start up the product again after checking whether the wireless LAN unit is
correctly inserted into the product.
The Intel
®
WiDi software does not detect or
connect to the product.
• Start up the Intel
®
WiDi software in the PC again.
• Start up the Intel
®
WiDi software after re-starting the PC.
• Start up the product again.
• Reset the settings of the product.
• When multiple networks exist in the vicinity, detection or connection may
not be possible. In this case, change the channel of the wireless router to a
channel that is not in use on another network.
• Update the Intel
®
WiDi software in the PC to the latest version.
Distortions, interruptions and delays are
observed in the image.
• When the intensity of the radio waves is not sufficient, the display may not
appear normally.
• Move the product to a location where there are no obstructions such as
walls and doors etc. between the PC and the installed display.
• Install the wireless LAN unit at a location with good electromagnetic
reception using the adapter for the wireless LAN unit and the USB
extension cable.
• Due to the image processing and wireless transmission processing, there
may be a delay compared to the PC display. This is due to the
specifications of the Intel
®
WiDi software.
The PC image does not occupy the full
screen of the display.
• Adjust the display size using the “Change TV Image Size” function in the
Intel
®
WiDi software.
• Adjust the display screen on the display end.
