background image

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Road, Irvine, CA  92618-1904

Copyright  ©  2006  Mitsubishi Digital Electronics America, Inc.

All Rights Reserved

CAUTION:

Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and
"PRODUCT SAFETY NOTICE" contained in this manual.

MITSUBISHI ELECTRIC

Ser

Ser

Ser

Ser

Service

vice

vice

vice

vice

Manual

Manual

Manual

Manual

Manual

2006

2006

2006

2006

2006

SPECIFICATIONS

LCD FLAT PANEL TELEVISION
VLP33 / VLP33+ CHASSIS

• Power Input

: 120V, 60Hz

• Power Usage

:

See Chart on Page 5

• Dimensions

:

See Chart on Page 5

& Weight

•  

LCD Panel

: Resolution - 1920 x 1080
: Vertical Scan Range - 60Hz

•  

Tuning

: Digital/Analog Tuner - 1 (NTSC/ATSC/QAM)

Out Of Band Tuner - 1 (For CableCARD™)

•  

Tuning Range

: Air VHF - 2~13, UHF - 14~69

Analog Cable - 1~125
Digital Cable - 1~135

•  Antenna Inputs

: 2-RF, 75

 unbalanced (Digital or Analog)

•  

A/V Inputs

: Composite or S-Video (NTSC, 480i)

(Analog

1 Front, 2 Rear

w/Stereo

Component, EIA770.3 Standard

Audio)

(480i, 480p, 720p, 1080i)
VLP33 - 2 Rear
VLP33+ - 3 Rear

•  

PC DVI-I Input

: Analog or Digital - VGA, W-VGA, SVGA, W-

(w/Analog

SVGA, XGA, 1280x720 (720p) at 60 Hz

Stereo Audio)

Digital Only - SXGA, WXGA at 60Hz

1920x1080 (1080p) at 24/30/60Hz:

•  

Inputs/Outputs

: HDMI™, EIA 861 B Standard

(Digital)

480p / 720p / 1080i at 60Hz
1080p at 24/30/60Hz:
w/DVI Analog Stereo Audio, 2 Rear

IEEE1394, MPEG-2, 2 Rear
Digital Audio Output (Dolby® Digital/PCM)

1 Rear, Coaxial

•  

Outputs

: Stereo Audio Output, 1 Rear (Fixed)

Record A/V Output, 1 Rear
NetCommand®/G-LINK™ IR Emitter

VLP33 - None
VLP33+ - 1 Rear, Mini Jack

•  

Speakers

: Stereo, 2-way, 5.5"x2.2", 10W x 2, 6

:

PWBs use lead Free Solder

• TV GUIDE and other related marks are registered marks of

Gemstar-TV Guide International, Inc. and/or one of its affiliates.

• HDMI™ is a trademark of HDMI Licensing, LLC
• CableCARD is a trademark of Cable Television Laboratories, Inc.
• Dolby and Dolby digital are registered trademarks of Dolby

Laboratories.

• DTV Link is a trademark of Consumer Electronics Association

VLP33

VLP33+

LT-37131

LT-37132

LT-46131

LT-46231

LT-46231

Pb Solder

• Weight and dimensions are approximate.
• Design specifications are subject to change without notice.

Summary of Contents for LT-37131















































Reviews: