background image

A Note to You

Thank you for buying a
KitchenAid

®

appliance.

KitchenAid designs the best tools for the
most important room in your house. To
ensure that you enjoy years of trouble-
free operation, we developed this Use
and Care Guide. It contains valuable
information about how to install, operate
and maintain your hot water dispenser
properly and safely. Please read it
carefully.

Also, please complete and mail the
Product Registration Card provided
with your hot water dispenser. This card
helps us notify you about any new
information for your hot water dispenser.

Part No. 3193348

®

Record your model’s information

Write down the following information about your hot water dispenser to better
help you obtain assistance or service if you ever need it. You will need to know
your complete model number and serial number. You can find this information
on the model and serial number label/plate.

If you need assistance or service, first see the “Troubleshooting” section of this
book. After checking “Troubleshooting,” additional help can be found by
checking the “Requesting Assistance or Service” section.

Builder/dealer name

Address

Phone number

Model number

Serial number

Purchase date

Date installed

(See the “Parts and Features” section for model and serial number label/plate
location.)

Keep this book and your sales slip together for future reference.

Installation Instructions 

and 

Use and Care Guide

IMPORTANT:
Read and save these instructions.

IMPORTANT:
Installer: 
Leave this guide with
homeowner.

Homeowner: Keep this guide for
future reference. Save this guide for
local electrical inspector’s use.

Instant Hot

®

Hot Water
Dispenser

Summary of Contents for Instant Hot Hot Water Dispenser

































Reviews: