background image

1. Power button
Switch the power button to turn the SWAN on or off.
2. Volume up key

5. Volume down key

* To increase the SWAN volume, touch or touch and hold      . To decrease the 
SWAN volume, touch or touch and hold      .
3. Previous

6. Next

* To play the previous or next song in a playlist on a paired Bluetooth device, touch
      or      .
* When the SWAN is pairing with a Bluetooth device, touch      or      to switch 
between voice instructions and alert tones.
4. Bluetooth pair key
* When music is playing, touch     to pause or resume the playback.
* When a call comes in, touch     to answer the call or touch and hold     to dismiss 
the call. To end the call, touch     again.
When you are in a call in handsfree mode, touch and hold     to switch from the 
AM08 handsfree mode to the phone mode. To switch back, set the answer mode  on 
your phone to Bluetooth.
* When you are not in handsfree mode, touch and hold     to disconnect the AM08 
from its paired Bluetooth device. The SWAN is then ready to pair with another 
device.
7. Microphone

Connecting your AM08 to Bluetooth devices

I

Connecting to one Bluetooth device

After you turn the AM08 on, it automatically searches for nearby Bluetooth 
devices and enters standby mode. On the device you want to pair with the AM08, 
turn on Bluetooth. After the AM08 is found on the device, touch 

HUAWEI

 

AM08

 to 

pair it with the AM08.

Note: On some Bluetooth devices, you may need to enter a password to set up a  
          connection. The default password is 

0000.

The next time you turn on the AM08, it automatically searches for and pairs with 
the Bluetooth device that it paired with previously. If no such devices are found, 
your AM08 will remain in standby mode.

II

.

 

Connecting to two Bluetooth devices

The first time you pair the AM08 with two Bluetooth devices, do the following:
1. Pair the AM08 with a Bluetooth device.
2. Touch and hold     to disconnect from the device and enable the AM08 to 

enter the ready-to-pair mode.

3. On the second Bluetooth device, search for and pair with the AM08.
4. On the first Bluetooth device, search for and pair with the AM08.

Note: The AM08 can work with only one Bluetooth device at a time. If you have two 
          Bluetooth devices paired, pause all operations on one device to have the AM08 
          run the operations on the other device.

If you do not clear the pairing information from two previously used devices, your 
AM08 will connect to them automatically when both are available.

Note:
Some Bluetooth devices do not support the Advanced Audio Distribution Profile 
(A2DP) and cannot use the AM08 to play media files. For media playback 
software incompatible with the AM08 will not allow the      ,      ,and     keys to 
work. Before using the AM08, make sure you have compatible Bluetooth devices 
and media playback software.

Please visit http://consumer.huawei.com/en/support/hotline/ for recently updated 
hotline and email address in your country or region.

Model: AM08

II

Indicators and port

1

2

3

4

7

6

5

Bottom view

Top view

HUAWEI Bluetooth Speaker

4

5

2

3

1

Getting to know your AM08

The AM08 is a Bluetooth-capable device that lets you play music wirelessly from 
other Bluetooth devices. It automatically searches for nearby Bluetooth devices 
after you power it on. The AM08 can be paired with two Bluetooth devices 
simultaneously, but can work with one device at a time. When paired with your 
phone, the AM08 functions as a speaker and microphone when you are on a call in 
handsfree mode.
Before you start using your SWAN, let's take a look at its features and learn how to 
use them.

I

Power button and keys

User Guide

AM08

1. Key indicator
This indicator turns on after the SWAN turns on or when you perform an operation. 
It will turn off when the AM08 is inactive for a short while.
2. Bluetooth pairing indicator
When the AM08 is pairing with another device, this indicator blinks quickly. If the 
pairing fails, this indicator blinks slowly. If the AM08 successfully pairs with the 
device, this indicator turns off.
3. Breath indicator
When the AM08 is on, this indicator blinks slowly. When a call comes in, this 
indicator blinks quickly.
4. Charging indicator
When the AM08 is charging, this indicator turns on. After the battery is fully 
charged, this indicator turns off.
5. Charging port
This port connects the AM08 to a power adapter (5 V output) through a USB 
cable. You may also connect the AM08 to a computer’s USB port  to charge the 
battery.

Safety information

This section contains important information about the operation of your device. It 
also contains information about how to use the device safely. Read this 
information carefully before using your device.

Operating environment

* The device supports a transmission distance of up to 10 meters. It is 
recommended that you place your Bluetooth device within a 10-meter range from 
the speaker.
* Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the 
device in these environments may result in circuit malfunctions. 
* Ideal operating temperatures are 10

 to 35

. Ideal storage temperatures are 

-10

 to 40

. Extreme heat or cold may damage your device or accessories. 

* Do not expose your device to direct sunlight (such as on a car dashboard) for 
prolonged periods. 
* To protect your device or accessories from fire or electrical shock hazards, avoid 
rain and moisture. 
* Keep the device away from sources of heat and fire, such as a heater, 
microwave oven, stove, water heater, radiator, or candle. 
* Do not place sharp metal objects, such as pins, near the earpiece or speaker. 
The earpiece may attract these objects and result in injury. 
* Do not allow children or pets to bite or suck the device or accessories. Doing so 
may result in damage or explosion. 
* Observe local laws and regulations, and respect the privacy and legal rights of 
others. 

Child's safet

* Comply with all precautions with regard to child's safety. Letting children play 
with the device or its accessories may be dangerous. The device includes 
detachable parts that may present a choking hazard. Keep away from children. 
* The device and its accessories are not intended for use by children. Children 
should only use the device with adult supervision. 

Battery safety

* The device has a built-in, non-removable battery. Do not attempt to remove the 
battery, otherwise the device may be damaged. To replace the battery, take the 
device to an authorized service center.
* If the device has not been used for a long time, charge the battery before you 
turn on the device.

Cleaning and maintenance

* Keep the device and accessories dry. Do not attempt to dry it with an external 
heat source, such as a microwave oven or hair dryer. 
* Do not expose your device or accessories to extreme heat or cold. These 
environments may interfere with proper function and may lead to fire or explosion. 
* Avoid collision, which may lead to device malfunctions, overheating, fire, or 
explosion. 
* Before you clean or maintain the device, stop using it, stop all applications, and 
disconnect all cables connected to it. 
* Do not use any chemical detergent, powder, or other chemical agents (such as 
alcohol and benzene) to clean the device or accessories. These substances may 
cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to 
clean the device and accessories.

* Do not dismantle or remanufacture the device and its accessories. This voids 
the warranty and releases the manufacturer from liability for damage. In case of 
damage, contact an authorized service center for assistance or repair.

Disposal and recycling information

try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
Caution: Any changes or modifications to this device not expressly approved by 
Huawei Technologies Co., Ltd. for compliance could void the user's authority to 
operate the equipment.

Legal Notice

Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. 
Trademarks and Permissions

       ,                  , and        are trademarks or registered trademarks of Huawei 
Technologies Co., Ltd.
The 

Bluetooth

 

  word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc

. and any use of such marks by Huawei Technologies Co., Ltd. 

is under license. 
Other trademarks, product, service and company names mentioned may be the 
property of their respective owners. 

Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance 
with the essential requirements and other relevant provisions of Directive 
1999/5/EC.
For the declaration of conformity, visit the web site 
http://consumer.huawei.com/certification

.

The following marking is included in the product:

This device may be operated in all member states of the EU.
--Observe national and local regulations where the device is used.
--This device may be restricted for use, depending on the local network. 

FCC Regulatory Compliance

FCC RF warning statement: The device has been evaluated to meet general RF 
exposure requirement. The device can be used in portable exposure condition 
without restriction. 

FCC statement

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to 

This symbol (with or without a solid bar) on the device, batteries (if 
included), and/or the packaging, indicates that the device and its electrical 
accessories (for example, a headset, adapter, or cable) and batteries 
should not be disposed of as household garbage. These items should not 

be disposed of as unsorted municipal waste and should be taken to a certified 
collection point for recycling or proper disposal.
For more detailed information about device or battery recycling, contact your local 
city office, household waste disposal service, or retail store.
Disposal of the device and batteries (if included) is subject to WEEE Directive 
Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The 
purpose of separating WEEE and batteries from other waste is to minimize the 
otential environmental impacts and human health risk of any hazardous 
substances that may be present.

Reduction of hazardous substances

This device is compliant with the REACH Regulation [Regulation (EC) No 
1907/2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries (if 
included) are compliant with the Battery Directive (Directive 2006/66/EC). For 
up-to-date information about REACH and RoHS compliance, please visit the web 
site http://consumer.huawei.com/certification

.

EU regulatory conformance
Statement

DISCLAIMER

ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS 
REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER 
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR 
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT 
SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR 
CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, 
REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS 
REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. 
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY 
FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS 
SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE 
PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE 
AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Privacy Policy

To better understand how we protect your personal information, please see the 
privacy policy at http://consumer.huawei.com/privacy-policy.

®

Note:
Before using the AM08 for the first time, charge it for 2 or 3 hours.
When the battery level is critically low, the AM08 automatically turns off. If this 
happens, charge the battery for a while and switch the power button to the off 
position then the on position to turn on the AM08.

6011773_01

Reviews: